Sinotruk Howo 10 tons dry powder foam combined fire truck

Sinotruk Howo 10-ton dry powder foam combined fire truck, vehicle model: JDF5270GXFGP100/Z6 dry powder foam combined fire truck, modified from Sinotruk Howo ZZ5357TXFV464MF5 original double-row fire truck chassis. The whole vehicle is composed of two parts: the fireman's cabin and the body. The crew cabin is an original double row, which can take 2+4 people. The car is of an exposed tank structure, and the front of the body is an equipment box (dry powder tank, nitrogen bottle, dry powder system ), the middle part is the tank body, and the rear part is the pump room. The liquid carrier tank is made of high-quality carbon steel, and the interior is sprayed with epoxy primer and epoxy asphalt paint, and is elastically connected to the chassis. It is equipped with CB10/60 low-pressure fire pump produced by Shanghai Rongshen Fire Equipment Co., Ltd., with a rated flow of 60L/S, and PL8/48 vehicle fire monitor and PF30 dry powder monitor produced by Chengdu West Fire Machinery Co., Ltd. are installed on the roof. The biggest feature of the car is the large liquid carrying capacity, good handling and easy maintenance. It can be widely used in public security fire brigade, factories and mines, communities, docks and other places to fight large oil fires and general material fires.

The fire performance of the whole vehicle meets the requirements of the GB7956-2014 standard; the chassis has passed the national compulsory product certification; the engine emission meets the requirements of the GB17691-2018 National VI Stage VI limit; the whole vehicle has passed the test of the National Fire Equipment Quality Supervision and Inspection Center (report No. and has been included in the Ministry of Industry and Information Technology's announcement of new automotive products.

1. Main parameters of Howo 10 tons dry powder foam fire truck

Second, the main parameters of Howo 10 tons dry powder foam fire truck

3. Crew room of Howo 10 tons dry powder foam fire truck

4. Body structure and performance parameters of Howo 10 tons dry powder foam fire truck

General arrangement	The whole vehicle is composed of two parts: the fireman's cabin and the body. The body layout adopts a three-part structure, the front part is the equipment box, the middle part is the tank body, the rear part is the pump room, and the tank body is a parallelepiped tank.

1. Equipment box and pump room Howo 10 tons dry powder foam fire truck

structure	The main frame structure is welded with high-quality square tube, and the outer decorative plate is welded with carbon steel plate.
equipment box	The equipment box is located at the rear of the passenger compartment, with aluminum alloy rolling shutter doors on both sides and lighting inside. The dry powder tank, nitrogen bottle and dry powder system are installed in the equipment box.
pump room	The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutters on both sides and the back, with lights inside, and some common equipment can be placed on both sides of the pump room; suction pipes and fire ladder brackets are placed on the top of the car box.
	Insulation location: install fuel heater (optional according to customer requirements)
Ladder and car handle	The rear climbing ladder is made of aluminum alloy two-section flip ladder. When used, the height should not exceed 350mm from the ground. The upper handle is made of a grooved anti-skid round steel pipe, and the surface is sprayed with plastic.
2. Water tank Howo 10 tons dry powder foam fire truck
capacity	6 cubic meters
material	High quality carbon steel (bottom 5mm side 4mm sealing plate 4mm
Tank fixing	Elastic connection with chassis frame
Tank Setup	Manhole: 1 DN460 manhole with quick locking/opening device
	Overflow port: 1 DN65 overflow port
	Residual water outlet: set up a DN40 water tank to discharge residual water, with ball valve
	Water injection port: connect 1 DN65 port on the left and right sides of the water tank
	Water inlet and outlet: set 1 water tank to the water pump inlet pipe, DN150 valve manual control, set 1 water pump to the water tank injection pipe DN65 valve manual control

3. Foam tank Howo 10 tons dry powder foam fire truck

4. Dry powder tank Howo 10 tons dry powder foam fire truck

volume	2 cubic meters
main material	Q345R
Pressure Vessel Category	I
design pressure	1.55Mpa
Pressure test pressure	1.94Mpa
set tempreture	50
working medium	dry powder, nitrogen
Product Standards	GB150-2011

5. Water system Howo 10 tons dry powder foam fire truck

1. Water pump

model	CB10/60 type low pressure vehicle fire pump
form	Medium and low pressure centrifugal
Limited Data	60L/s @1.0MPa
outlet pressure rating	1.0MPa
maximum suction depth	7m
water diversion device	Self-contained vane pump
Diversion time	Maximum suction depth≤50s

2. Piping system Howo 10 tons dry powder foam fire truck

Pipe material	High quality seamless steel pipe
suction line	There is a DN150 suction port on the back of the pump room
water injection line	There is a DN65 water injection port on the left and right sides of the water tank, and a DN65 water pump is installed in the pump room to inject water into the tank
outlet pipe	There are 2 DN65 and 1 DN80 water outlets on the left and right sides of the pump room, with stop valves and cover
Cooling water pipeline	Cooling water line and control valve with cooling power take-off

6. Fire extinguishing device

1. Car foam cannon

model	PL48
manufacturer	Chengdu West Fire Machinery Co., Ltd.
Rotation angle	360° horizontal rotation
Maximum pitch/depression angle	Depression angle≤-15°, Elevation angle≥+45°
flow	48L/S
range	Foam≥55m Water≥60m

2. Vehicle dry powder gun and reel

model	PF30
Control Type:	Electric and pneumatic operation Manual operation
Material:	Corrosion resistant material
Spray intensity:	30kg/s
Working pressure:	1.4Mpa
1 set of dry powder reel, length 30m, diameter DN25, with dry powder gun, manual winding.

3. Nitrogen bottle

Number of nitrogen cylinders:	6 (to meet the use of dry powder, with a cylinder holder), the design conforms to GB5099 regulations
capacity:	70L
Filling pressure:	15Mpa
Inflation time:	45s, with centralized inflation port
1 set of dry powder reel, length 30m, diameter DN25, with dry powder gun, manual winding.

Seven, fire control system

The control panel mainly includes two parts: cab control and pump room control

In-cab controls	Water pump disengagement, warning light alarm, lighting and signal device control, etc.
Pump room control	Bodywork main power switch, parameter display, status display

Eight, electrical equipment

Additional electrical	independent circuit
Auxiliary lighting	The fireman's room, the water pump room and the equipment box are respectively equipped with lighting lamps, and the control panel is equipped with lighting and indicator lights, etc.
Strobe light	Red and blue strobe lights are installed on both sides of the body
warning device	Long row full red warning lights, mounted on the top of the cab
	Siren with control box below driver front
fire lighting	1 35W fire searchlight installed at the rear of the upper body

9. Surface treatment

10. Arrangement and equipment of vehicle-mounted fire fighting equipment

1. Equipment layout

2. Equipment (standard)