Shaanxi Automobile Xuande 30 cbm feed truck (30 cbm)

Shaanxi Xuande 30-cbm bulk feed truck (30- cbm ) parameter configuration table and picture display

Shaanxi Xuande small three-axle 30- cbm feed truck configuration: adopts the high-end Xuande series chassis produced by Shaanxi Auto, equipped with 220 hp Weichai, Weichai 245 hp 6-cylinder engine, Fast 8-speed gearbox, 5 tons front axle , 11 ton rear axle, central lock with remote control key, electric window cab with air conditioning, ABS brake assist, driving recorder; top configuration: tank volume 30 cubic meters meters, tank body part 4 warehouses, can be loaded and unloaded separately For feed, this model can be equipped with three unloading methods such as external 380V power supply driving unloading or installation of on-board generator unloading, and full hydraulic driving unloading.

The advantages of Shaanxi Xuande small three-axle 30- cbm feed truck:
The vertical conveying height is ≧8.5 meters (the top auger length is 6.8 meters), and the horizontal conveying distance: ≧6 meters.
Unloading speed: 600-700kg/min (the whole vehicle feed is unloaded within 25 minutes). Residual rate: ≦0.2%.
Auger technology: It adopts special bearing link, which is efficient, stable and low broken rate.
Paint process: anti-rust and anti-corrosion.
The unloading method can be selected according to the actual situation of the user: electric auger type (three-phase electric supporting place), or hydraulic auger type (no three-phase electric place, the hydraulic auger is driven directly by the vehicle power to discharge).
Tank process: 3mm thick checkered plate on the top, 4mm thick high-strength truck bon steel on the tank body, high-strength density load-bearing frames on both sides of the tank.