Parameter configuration table and picture display for Qingling Isuzu 3 tons water tank fire truck (3 CBM)
Model overview:
The Isuzu 3 ton water tank fire truck is modified by our factory on the basis of Chongqing Isuzu’s original second-class chassis QL1070A1KWY. The vehicle has a compact structure, convenient and flexible, good power performance, high speed, and can freely enter and exit the narrow rural roads and communities. The full set of fire fighting functions of the fire truck , the upper frame of the upper box body is all made of aluminum alloy profiles produced by imported European technology, the weight of the vehicle is reduced, the maneuverability and the weight of the vehicle are increased. In addition to the fire-fighting pumps and equipment, there are also large-capacity water storage tanks, water guns, and water cannons. Water and firefighters can be transported to the fire scene to fight the fire independently. It can also draw water from the water source for direct fire fighting, or supply water to other fire trucks and fire extinguishing spray devices. It can also be used as a vehicle for water supply and water delivery in water-deficient areas. It is mainly used for general fire extinguishing in large and medium cities and towns, narrow rural streets, urban communities, and busy wholesale markets. It can be used for garden sprinkler irrigation and road cleaning in leisure time.
Vehicle parameters:
Vehicle model
Isuzu 3 tons water tank fire truck
Chassis model
QL1070A1KWY
Quality parameter (kg)
Rated loading quality
1995
Dimensions
6820×2000×2820
Vehicle curb quality
4330
Tank size
1924×920×1183
Maximum total mass
6700
Wheelbase
3815
Engine parameters
model
4KH1-TCG40
Manufacturer
Qingling Isuzu (Chongqing) Engine Co., Ltd.
power
88/120 horsepower
Displacement
2999
Emission Standards
GB17691-2005 ( Euro IV), GB3847-2005
Number of passengers
2+3
Maximum speed
90km/h
Number of leaf spring
8/6+5
Tires
7.00-16
Front overhang
1015
Back overhang
1890
Axle load
2080/4620
Front track
1504
Rear track
1425
other
Back extension: 100mm; tank volume: 1.995 cubic meters meters; tank size (length × width × height): 1924 × 920 × 1183mm (mm); firefighters are calculated at 75 kg/person; side protection and rear lower protection device materials Material: Q235, monolithic structure; the ground clearance of the lower rear protective device: 395mm.
Dedicated functions:
Cab description
Flat-head all-metal enclosed cab, double-row seats, four-door, panoramic curved windshield. Optional new front cover, front bumper, front combination lamps, doors and windows, and optional front wall mask.
Tank
Adopt high-quality truck bon steel materials, welded structure, with vertical and horizontal anti-oscillation plates, and high-tech anti-corrosion treatment. Optional stainless steel material.
Pump room
The rear-mounted vehicle fire pumps are equipped with new easy-pull high-strength aluminum alloy rolling doors on the left and right sides of the pump room and the equipment box.
Equipment box
It is manufactured by adopting the built-in tower connection technology of aluminum alloy profiles produced by the introduction of European technology, and has a full connection structure.
Electrical configuration
There is a long row of warning lights at the front of the top of the cab. A 24V, 60W fire field light is equipped behind the body. The top of both sides of the vehicle is equipped with matching red and small flashing lights. Safety signs are installed below. The passenger compartment, equipment box, The pump room is equipped with lighting lamps, 100W alarms, rotating warning light switches, and communication equipment preparation interfaces.
