China Trucks maker and designer

Aerial Platform

» Special Purpose Truck » Aerial Platform

JMC 16m Aerial Operation / Bucket Truck -double row 4 doors

Parameter configuration table and picture display of JMC 16m aerial operating vehicle – double row 4 doors

JMC 16m double row Telescopic Aerial  Operation / Bucket Truck

1. The basic parameters of the vehicle:

Serial number name Model and specification
1 Vehicle brand Chengliweiaerial operating vehicle
2 Product number CLW5050JGKJ5
3 Chassis model JX1061TSG25
4 Maximum working height 16 meters
5 Work bucket The height of the platform from the ground≥14.3m

Maximum operating range of the platform≥6.92m

Operating range at the maximum operating height of the platform≥2.26m

Operating height at the maximum operating range of the platform≥9.2m

Rated load of working bucket 200kg

Outrigger Method: H-shaped outrigger

Quantity: 4

Control: Individually adjustable or linked.

Transverse span: 2680mm

Longitudinal cross play: 3050mm

Hook The maximum lifting weight is ≤1000kg, and the safety value is 800kg.

Maximum lifting height 6.3m

Main operation Operating position: double working position operation of turntable and hanging rail.

Control mode: manual hydraulic or electronic control operation.

6 Hoarding and platform board Steel tool box and hoarding, pattern anti-skid platform
7 Boom structure Three-section folding arm
8 Slewing device Two-way 3600 continuous rotation
9 engine JX493ZLQ5 Jiangling engine 85kw (115 horsepower)
10 Vehicle size 7300×2000×3100
11 Total mass 5390kg
12 Curb quality 5065kg
13 Wheelbase 3360mm
14 Environmental protection / exemption Yes/Yes

JMC 16m Straight Boom Telescopic Aerial  Operation / Bucket Truck
2. Introduction and performance characteristics of aerial work trucks:

1. Function introduction:

JMC Shunda’s 16-meter high-altitude operating vehicle adopts a folding crank structure, the operating arm is three-section folding, the working bucket and the turntable have double working positions, up and down operation, hydraulic manual control, 360-degree rotation, four hydraulic outriggers, with 1 ton Hook, the maximum load-bearing capacity of the working bucket is 200 kg, steel tool box and hoarding, and anti-skid tread plate.

The main components of the vehicle are equipped with two-way hydraulic lock, two-way lock balance valve, hydraulic flow valve, hydraulic cylinder and other domestic well-known brands, with stable reversing, flexible and convenient operation; outriggers and working arms are interlocked, safe and reliable, and prevent misoperation; H-shaped outriggers have large span and good stability. The outriggers can be stretched independently and linked together. The rear outriggers are equipped with outrigger warning lights, which are used to outline the outriggers and send out light alarm signals during operation.

JMC 16m double row Telescopic Aerial  Operation / Bucket Truck

2. Product overview:

1. The working bucket adopts mechanical self-balancing design, its function is that the working bucket is always in a balanced state when working.

The maximum extension angle of the forearm is up to 65° for adjustment to the best working position. (The measurement method of forearm extension angle is different, some manufacturers mark it as 90°)

2. The upper and lower operating systems can complete various operations on the work bucket and the turntable.

3. Night work lights, operation lights can be installed on the console according to the customer’s operating environment, making night work safer.

4. The outriggers are individually adjustable, and each outrigger can be adjusted separately according to the working ground environment. Even if the ground is uneven, the whole vehicle can be adjusted to a stable state.

5. The outrigger adopts front and rear H-shaped structure, which has larger stress surface and higher stability; it can prevent the truck beam from deforming or breaking (Note: If the outrigger adopts front V and rear H-shaped models, it will be used for a long time. After the front is upside down, it is easy to cause the truck beam to deform or break).

6. The four vertical outrigger cylinders and the upper arm, lower arm, and forearm cylinders are all equipped with two-way hydraulic locks. The function is to lock the cylinders in place after reaching the required position to prevent accidents. A two-way balance valve is installed on the working arm to make the working arm run more smoothly.


3. Details of onboard accessories:

1. A manual for a truck.

2. A copy of the vehicle chassis certificate.

3. A manual for aerial work trucks.

4. Warranty for trucks.

5. Truck-mounted tools.

JMC 16m Straight Boom Telescopic Aerial  Operation / Bucket Truck

Aerial Platform , , , , ,

Enquiry Form ( we will get back you as soon as possible )


4 + 4 = ?

Maybe you like also

  • Categories

  • Open chat
    Whatsapp Talk Now!