China Trucks maker and designer

Aerial Platform

» Special Purpose Truck » Aerial Platform

JMC 12m Aerial Operation / Bucket Truck

Parameter configuration table and picture display of JMC 12m small aerial work truck

JMC 12m Aerial Platform Truck

1. The basic parameters of the vehicle:  

Serial number


Model and specification


Vehicle brand

Chengliwei -12m small aerial operating vehicle


Product number



Chassis model



Vehicle size

5998 ×2000×2950


Total mass



Curb quality




JX493ZLQ5A 85kw/115 horsepower





Maximum working height

12.5 meters


Main technical parameters of operation

The height of the platform from the ground≥10.8m

Maximum operating range of the platform≥6m

Operating range at the maximum operating height of the platform≥2.5m

Operating height at the maximum operating range of the platform≥7.5m

Rated load of working bucket 200kg


Method: H-shaped outrigger

Quantity: 4

Control: Individually adjustable or linked.

Transverse span: 2720mm

Longitudinal cross play: 2850mm


The maximum lifting weight is ≤1000kg, and the safety value is 800kg.

Maximum lifting height 5.2m

Main operation

Operating position: double working position operation of turntable and hanging rail.

Control form: electro-hydraulic control.


Hoarding and platform board

Steel toolbox, stainless steel fence, pattern anti-skid platform


Boom structure

Three-section folding arm


Slewing device

Two-way 360 0 continuous rotation


Environmental protection / exemption


JMC Aerial Working Truck

2. Introduction and performance characteristics of aerial work trucks :

1. Function introduction:

JMC Shunda small Card12The meter-high-altitude operating vehicle adopts a folding crank arm structure, and the operating arm is a three-section folding type.Working bucket and turntable have dual working positions, up and down operation, electro-hydraulic control, working arm can rotate 360 degrees, four hydraulic outriggers, optional 1 ton hook, lifting weight ≤ 800 kg, working bucket maximum load 200 kg, inside the bucket The engine can be controlled remotely to start and stop, the size of the working bucket: 1200*600*1100,Steel toolbox and stainless steel fence, pattern anti-skid platform.

The main components of the vehicle are equipped with two-way hydraulic lock, two-way balance valve, hydraulic flow valve, hydraulic cylinder and other domestic well-known brands, which are stable in reversing, flexible and convenient to operate; outriggers and working arms are interlocked, safe and reliable, and prevent misoperation; H -type The outriggers have a large span and good stability. The outriggers can be stretched independently and linked together. The rear outriggers are equipped with outrigger flashing lights, which are used to outline the outriggers and emit light alarm signals during operation.

JMC 12m Aerial Working Truck 

2. Product overview:

1,  The working bucket adopts a mechanical self-balancing design, and its function is that the working bucket is always in a balanced state when working.

The maximum extension angle of the forearm is up to 65 ° for adjustment to the best working position. (The measurement method of forearm extension angle is different, some manufacturers mark it as 90 °)

2,  The upper and lower operating systems can perform various operations on the work bucket and the turntable.

3.  Night work lights, the operating table can be optionally equipped with operating lights according to the customer’s working environment, making night work safer.

4.  The outriggers are individually adjustable, and each outrigger can be adjusted individually according to the working ground environment. Even if the ground is uneven, the whole vehicle can be adjusted to a stable state.

5.  The outrigger adopts front and backHType structure, the bearing surface is larger, and the stability is higher; it can prevent the truck beam from deforming or breaking (note: if the outrigger adopts the frontV,RearHType of truck , after long-term use, the truck beam is likely to be deformed or broken down due to the upside-down of the front.

6.  The four vertical outrigger cylinders are equipped with two-way hydraulic locks, whose function is to lock the cylinders in place after reaching the required position to prevent accidents. The working arm cylinder is equipped with a two-way balance valve to make the working arm run more smoothly.

JMC 12m Aerial Working Truck

3. Details of onboard accessories:

1. A manual for a truck.  

2. One copy of the vehicle chassis certificate.  

3. A manual for aerial work trucks.  

4. Warranty for trucks.  

5. Truck-mounted tools.

JMC 12m  small  Aerial  Operation / Bucket Truck JMC 12m  small  Aerial Platform Truck

Aerial Platform , , , , , , ,

Enquiry Form ( we will get back you as soon as possible )


2 + 5 = ?

Maybe you like also

  • Categories

  • Open chat
    Whatsapp Talk Now!