Jiefanglong V corrosive goods tank transporter (9 cbm)

Comments
Excerpt
Jiefanglong V tank truck for corrosive materials, with a tank volume of 9 cubic meters, is suitable for transportation of dangerous goods. The name of the transport medium: sodium hypochlorite, liquid caustic soda, hydrochloric acid, sulfuric acid, ammonia water, the densities are: 1050 kg/m3, 1040 kg/m3, 1047 kg/m3, 1045 kg/m3, 990 kg/m3 ; Item number: 8; Effective tank volume: 9 cubic meters.

Faw long V corrosive goods tank transporter (9 cbm ) parameter configuration table and picture display

Jiefanglong V corrosive goods tank transporter (9 cbm)

 

Faw single bridge hydrochloric acid transporter product detailed configuration
Faw single-axle hydrochloric acid transporter chassis configuration : Qingdao Long V high roof sunroof cab with air conditioning, power steering, Xichai 6-cylinder 180 horsepower engine, 10.00 steel tires, wheelbase 4500, 385 rear axle, original ABS, front disc system Speed limiter
Faw single bridge hydrochloric acid transporter tank configuration : tank material: Q235B truck bon steel, no plastic lined truck bon steel tank tank body is 6mm truck bon steel plate, plastic lined truck bon steel tank tank body is 5mm truck bon steel plate, tank body is 16mm plastic lined PE (polyethylene), the head is a 6mm water pressure swelling head, the inside of the tank is equipped with double-layer corrugated group corrugated plates, and the top of the tank is equipped with lifting guardrails and protection devices (anti-collision bar, dispersing disc, breathing valve), Main valve: stainless steel subsea valve (emergency cut-off valve), with two 3-inch ball valves at the left and right of the rear end

Main technical parameters of Faw long V tank transporter for corrosive materials
Vehicle model CLW5162GFWC5 Announcement batch 296
Dimensions (mm) 7946×2500×3300 Tank volume (m3) 9 cubic meters meters
Total mass (kg) 16000 Rated mass (kg) 8805,8870
Curb weight (kg) 7000 Front passenger (person) 3,2
Axle load (kg) 5600/10400 Exempt no
Top speed (km/h) 80 Fuel oil Yes
Fuel consumption (L/100Km) 26.1,26.5,26.4,26.4 Environmental protection Yes
Fuel type Diesel oil Emission Standards Euro five
other The vehicle is suitable for transportation of dangerous goods. The name of the transport medium: sodium hypochlorite, liquid caustic soda, hydrochloric acid, sulfuric acid, ammonia water, the densities are: 1050 kg/m3, 1040 kg/m3, 1047 kg/m3, 1045 kg/m3, 990 kg/m3 ; Category item number: 8; Effective tank volume: 8.8 cubic meters meters, tank dimensions (length × diameter) (mm): 5200 × 1600. A flat-top cab is optional with the chassis. Protective material: Q235A truck bon steel, connection method: welding connection on the left and right sides and rear protection, rear protection section rule (mm): 140×50, rear protection ground clearance (mm): 450. Only use chassis radial tire models (9.00R20 16PR, 10.00R20 14PR, 10.00R20 16PR, 10R22.5 14PR, 10R22.5 16PR) and a chassis with ABS. The front wheels of the truck are equipped with disc brakes, front exhaust pipes, Equipped with a speed limit device, the speed limit is 80km/h. Install a driving recorder with satellite positioning function. Only BF4M2012-16E5, BF6M2012-18E5, CA6DLD-22E5, CA6DLD-18E5 engines are used, and the corresponding fuel consumption values (L/100km) are: 26.1,26.5, 26.4, and 26.4 respectively. Dangerous goods transport vehicles of the type of vehicle (AT vehicle).
Chassis parameters of Faw long V tank truck rier for corrosive materials
Chassis model CA1167PK2BE5A80 Chassis brand FAW truck d
Number of axes 2 Front track (mm) 1800,1914
Wheelbase (mm) 4500 Rear track (mm) 1800, 1860
Number of tires: 6 Tire specifications 9.00R20,10R22.5,10.00-20,10.00R20
Approach departure angle 22/13 Front suspension and back suspension 1332/2064,1332/1200
Engine parameters of Faw long V tank truck for corrosive materials
engine model Engine manufacturer Displacement (ML) Power (ML)
BF4M2012-16E5 China FAW Group Corporation 4040 113
BF6M2012-22E51 China FAW Group Corporation 6060 165
BF6M2012-18E5 China FAW Group Corporation 6060 139
CA6DLD-22E5 FAW FAWAutomobile Co., Ltd. Wuxi Diesel Engine Factory 6600 164
CA6DLD-18E5 FAW FAWAutomobile Co., Ltd. Wuxi Diesel Engine Factory 6600 134
CA4DLD-18E5 FAW FAWAutomobile Co., Ltd. Wuxi Diesel Engine Factory 4400 134
CA4DK1-18E5 China FAW Group Corporation 4764 139
CA6DH1-22E5 China FAW Group Corporation 5700 165
CA4DH1-16E5 China FAW Group Corporation 3800 121

1. Tank material selection:
Tank plate selection: truck bon steel, truck bon steel lined with plastic, stainless steel plate, aluminum alloy, etc. The material used for the tank body should have good corrosion resistance, mechanical properties, welding performance and other process properties, and meet the requirements of the manufacturing, Basic requirements for inspection and safe use. Carbon steel or low-alloy steel should have good plasticity, the yield strength at room temperature should not be greater than 460MPa, the upper limit of tensile strength should not be greater than 725MPa, and the ratio of the yield strength to the lower limit of tensile strength should not be greater than 0.85. The use of truck bon steel, low-alloy steel meets the Euro standard GB/T 8163, and the stainless steel pipe meets the Euro standard GB/T 14976.

2. Tank manufacturing process
1. Production process of truck bon steel, stainless steel, aluminum and aluminum alloy cans:
1. The tank body adopts the automatic reeling process, the partition is placed in the tank body, and the tank body is formed at one time with advanced butt welding technology.
2. After the tank body is formed, the high-pressure gas leak test makes the tank body have the characteristics of high strength, stable center of gravity, and safe and stable vehicle transportation.
2. Production process of truck bon steel lining plastic tank:
1. After the truck bon steel tank is formed, the tank is tested for leakage (water pressure/air pressure).
2. Spot weld the steel wire mesh on the inside of the tank and on the front and back heads.
3. Put the modified polyethylene white particles into the tank at one time according to the material required for the thickness of rotomolding 16mm, and hot roll forming.
4. After curing, test with spark meter and X-ray side detector.

service advantage:
1. Issuing a formal chassis certificate, a formal vehicle certificate, a formal vehicle purchase tax invoice, a Euro unified motor vehicle, vehicle-mounted tools, vehicle quality assurance manual, product quality certificate, product completion drawing, pressure test report, air tightness Test report, subsea valve inspection certificate, product instruction manual, product qualification certificate, tank product safety performance supervision and inspection certificate, tank safety accessory quality certificate, vehicle instruction manual, Euro service station directory, etc.
2. From the date of delivery to the customer, within the normal range of use, free repairs within 10,000 kilometers or one year (excluding wearing parts and electrical parts), more than one year, only the parts fee will be charged;
3. FAW of the special vehicle after-sales service system, reasonably distributed in urban and rural areas across the Euro , timely and effective maintenance and repair; the service makes customers 100% satisfied.

 

Welcome to Chengli Special Automobile Co.,Ltd, pls contact us via: sales@chenglico.com
匿名

Comment

Anonymous Write