Chassis configuration of JAC 8x4 flatbed transporter truck
It adopts the chassis of JAC's front four and eight rear A series dump trucks, which is strong and durable. This model is a short wheelbase model, with a small turning radius. It is not difficult to drive on a mountain road with big bends and many turns. The wheelbase is 3.2 meters. The front four and eight rear excavator flatbed trailers are equipped with A5X semi-high roof cab, Weichai 300 horsepower euro VI engine, Shaanxi Fast 10-speed gearbox, you can choose 153 rear axle or 457 rear axle , 11.00R20 steel wire tires, equipped with half-height roof wide-body cab, airbag seat, with air conditioning, original ABS, driving recorder.
Parameter configuration of JAC 8x4 flatbed transporter truck
| Vehicle model | DLQ5311TPBY5 JAC A5 Flatbed Truck |
| engine | P7 Weichai 300 horsepower |
| gearbox | Fast 10 speed gearbox |
| Front and rear axles | Front axle 7 tons, rear axle 13 tons (457 axles) |
| wheelbase | 1800+3800+1350mm |
| tire | 11R20 steel wire tire |
| girders | 300 double layers |
| Vehicle size | 11100×2495×3220 |
| instruction | Suitable for mountain climbing and chaotic roads, Geerfa luxury cab, the seat adopts air suspension, the interior is luxurious, the actual usable board length is 8 meters, including the 80 cm rear climbing part |
JAC Front-Four-Rear-Eight Flatbed Transporter|JAC Front-Four-Rear-Eight Excavator Transporter Top Loading Configuration The top loading can choose standard type or heavy-duty type. The standard top-loading beam is made of 12*12 6mm thick square steel, and the whole piece is designed to ensure the bearing performance. The cargo box is flat 8mm thick checker plate; the heavy-duty top-loading beam is made of 14*14 size 8mm thick square steel, and the whole piece runs through Type design, better bearing performance, the cargo box flat plate is 10mm thick checkered plate, the climbing ladder adopts the heavy-duty reinforced design, adopts three bars and double spring reinforcement treatment, with rear outriggers, the flat plate has inclined support, the cargo box flat plate can be telescopic, extend 3 meters out, 2.5 meters retracted, and 8 meters in length of the cargo box, it is the most ideal flatbed truck for transporting 30-40 tons of large excavators and large construction machinery.
Picture of JAC 8x4 flatbed transporter truck
Contact customer service for reserve price: +86 18872992009 (same number on WeChat)
This article was originally published by "Special Vehicle Network", please indicate the source for reprinting! All models are directly sold by the factory, there is no middleman to make the difference, so that you can buy a car with confidence, use the car comfortably, big brand, trustworthy!