China Trucks maker and designer
Mail: sales@runtrucks.cn
EnglishالعربيةবাংলাFrançaisDeutschItalianoPortuguêsРусскийEspañolاردو

Special Purpose Truck

» Special Purpose Truck

Isuzu one tow one wrecker

Isuzu CLW5041TQZQ5 one tow one wrecker

五十铃一拖一清障车 前侧图

Isuzu CLW5041TQZQ5 a side view of a front drag wrecker

五十铃一拖一清障车 工厂实景

Hubei Cheng Li Group plant aerial view

 

Cheng Li Group is a truck, education, investment as the mainstay of the company, Cheng Li Special Purpose Vehicle Co., Ltd. is an important part of the process of the Group, is the way of the main pillars of the Group’s auto sector enterprises.In 2010, Cheng Li Special Purpose Vehicle Co., Ltd. covers an area of 500 acres, in the book more than 2,000 employees, production and marketing of various types of special purpose vehicles of more than 10,000 units, the output value of one billion yuan, export 15 million yuan, 20 million yuan turned over to state tax.

Cheng Li Special Purpose Vehicle Co., Ltd., NDRC designated professional production of various kinds of special-purpose vehicles manufacturers, large dedicated truck factory.Well-known landscape, petrochemical, municipal sanitation special vehicle manufacturers.The company has the right to export their own products occupy a large number of foreign markets, leading varieties sprinkler, tanker, truck mounted crane, refrigerated trucks, wrecker trucks, flatbed trucks, suction truck, sewage suction trucks, garbage trucks, sweep bus, truck, dump truck, coach trucks, semi-trailer, fire truck, chemical trucks, powder material truck, concrete mixers, pressure vessels and other 18 series over 300 varieties of models.Registered trademark “Cheng Liwei” brand, won the well-known trademarks in China, Dongfeng, FAW of the company’s important cooperation partner, dedicated primarily engaged in various types of vehicle manufacturing business, while sales of all major vehicle manufacturers and accessories.

五十铃一拖一清障车 程力集团

 

Wrecker full name wrecker, Also known astrailer, Roadside assistance truck, drag truck, with lifting, pulling and traction lifts and many other features, wrecker mainly used for fault road vehicles, the city of illegal vehicles and rescue and other.Wrecker by category can be divided into: tow-piece type, separate type tow, a drag-type, one tow two cars flat-type, multi-wrecker, hydraulic automatic clamping type.

 

五十铃一拖一清障车 正前图

Isuzu CLW5041TQZQ5 a wrecker tow a positive rake chart

五十铃一拖一清障车 前侧图

Isuzu CLW5041TQZQ5 a side view of a front drag wrecker

五十铃一拖一清障车 正侧图

Isuzu CLW5041TQZQ5 delayed a wrecker positive side in FIG.

五十铃一拖一清障车 后侧图

Isuzu CLW5041TQZQ5 a wrecker dragged back side of Fig.

五十铃一拖一清障车 后侧图

Isuzu CLW5041TQZQ5 a wrecker tow a positive Figure

五十铃一拖一清障车 底盘细节

五十铃一拖一清障车 底盘细节

五十铃一拖一清障车 上装细节

五十铃一拖一清障车 上装细节

五十铃一拖一清障车 前侧图

Isuzu CLW5041TQZQ5 a side view of a front drag wrecker

Isuzu CLW5041TQZQ5 a wrecker tow a specific purpose and materials

Wrecker means a road rescue operations equipped with specialized vehicles and equipment.As the trucks on the road while driving, failure and accidents are inevitable, especially on the highway, a phenomenon often happens.Wrecker task is to fault truck accident or truck off the site in a timely manner, to ensure smooth road.Therefore, wrecker, also known as road rescue vehicles.With the increase in the use of high-grade roads and vehicles, wreckers also been developed.

Wrecker uses: mainly used for fault road vehicles, the city of illegal vehicles and rescue.

Wrecker truckriage arm, boom all high strength steel sheet, shaped by bending.Automatic welding protection dioxide, allowing only two welds, less welding, deformation, precision, high strength, and after ultrasonic weld inspection. Wrecker all truckbon dioxide welding and TIG welding, weld length greater than 300mm, automatic seam, and the weld surface smooth, beautiful.

 

 

Safe driving wrecker

 

With the increase in the use of high-grade roads and vehicles, wreckers also been developed.But at the same wrecker development, inevitably some insecurity also ensue, so focus on economic interests but also pay attention to the safe operation wrecker.

1) before the wrecker driver reversing, reversing the route should be truckefully observed, after confirmation with the conditions for safe reversing can reverse.Reversing the process to be slow moving, to observe the situation wrecker sides and rear, and pay attention to the spatial position of both sides of the front, stand ready to stop, so as not to rub because the steering angle is too large collision accident occurred.Even the rear road conditions are very good, nor speed up and reverse.

2) In a general way reversing should avoid heavy traffic, non-motorized vehicles and more from the line, the narrow road sections.When reversing, if found by passing vehicles, should take the initiative to stop and yield.When required because reverse turn, should choose to not affect the normal traffic of the lot.

The first 3) Wrecker If you need to turn around should select flag is not prohibited U-turn, broad sections of the small traffic is prohibited U-turn No U-turn areas or dangerous sections, wrecker turn, should first observe behind wrecker traffic conditions, confirm the safety.

4) Wrecker U-turn process, should strictly control the speed, truckefully observe the situation before and after the road-side, confirm the safety before we can go forward or reverse, and stand ready to stop.You must turn on the ramp when each should be used wrecker parking handbrake control, so as not to move because wrecker slip caused accident.

 

 

 

If the owner by the wrecker: a chassis, the lifting means lifts the traction means,Hydraulic system, Electric control system,The bodyAnd toolbox, has a lifting, pulling and traction lifts and many other features for highways, urban roads wrecker job.

Wrecker Wrecker purpose is to ensure the smooth flow of road engineering and design of special vehicles, equipment is an important downtown and highway traffic management.It can quickly and timely, safely eliminate accidents, breakdowns on the road, illegal vehicles, special vehicles to ease road traffic.

First, according to the structure wrecker Tropsch type generally divided into separate wrecker crane, crane joint body trucke wrecker, flat wrecker, four series common type.Wherein the crane bracket comprising separating wrecker wrecker crane rotating and non-rotating two types wrecker.

A second, commonly known wrecker 3 tons, 5 tons wrecker, wrecker eight tons, 20 tons wrecker wrecker specifications like, actually refers to the chassis of the kind used wrecker level load capacity.It is the total mass of the towed vehicle has a certain relationship in the ability, but not necessarily linked, the greater tonnage of operational capacity wrecker correspondingly larger.

Third, the wrecker be torr (drag) of the vehicle from the scene is cleared, the general trucke and pull two methods Tuoqian.Is the use of pull-Tropsch Tropsch wrecker arm is lifted and towing motorcycles.Towing dragged often referred to, is the use of wrecker will be hard-wired trailer towing.

Fourth, the use of truck operation, use precautions and prolong the life of wrecker.

 

Wrecker Maintenance of common sense:

 

 

Wrecker was first used in highway traffic is very developed countries, the United States in the early 1950s that is to produce the world’s first truck wrecker.This structure is relatively simple when the vehicles driven by the engine, by a mechanical transmission to drive the winding mechanism, and with a supporting rod, one end of the vehicle lift off the fault site, and often self-made chassis, are more single function, it is clear the way the first phase of vehicle development barrier.

Heavy-duty wrecker is a technology development wrecker notable feature.With the construction of heavy tonnage of China’s auto adjustment, the Euro’s western development, the South and West-East, plus start and spread the Shanghai World Expo construction of Olympic construction and improvement of road conditions, the development of the transport industry, road transport to high speed, intensive, dedicated, container development, will lead to heavy-duty vehicle industry (including special heavy-duty vehicles) the rise.As a way to ensure the smooth flow of the wrecker, no condensate must be heavy-duty, heavy-duty vehicles to meet the needs of wrecker.

Wrecker intelligence, that is, from safe, convenient and humane considerations, assembling a number of smart devices in the system, such as remote control systems, security alarm systems organization, emergency rescue system.

Wrecker chassis specialization is the inevitable trend of development of domestic industry Wrecker.Home wrecker all converted to the use of two types of chassis.Axle load distribution is based on two types of truck chassis designed, which required axle load distribution when the wrecker lifts job are different.It will always be a wrecker lifts institutions as well as the potential of the total mass of the wrecker is also less than the maximum total mass, but its rear axle has been overloaded.Axle load distribution of second-class chassis wrecker is not applicable.As the wrecker is kind of vehicles, which need a lot of work onboard accessory tool.The private job aids is important to ensure safe and fast operation.With the types and styles of vehicles continue to increase, resulting in an accident and failure mode on the road hanging , so only continue to develop safe, practical and efficient operation of various types of accessories to meet the needs of the job wrecker.

 

With automatic transmission, people can kick the accelerator and one footbrakeBetween the completion of driving a truck, very easy.If the owner usually neglect the maintenance of the automatic transmission, the automatic transmission is very delicate prone to failure.

Wrecker gearbox Tips

1.When wrecker parking time, the shift lever is still crane in the D range.

While waiting for a signal or traffic jam, if the time the shift lever can be held in one minute at the D range, but a long time, the best gear change into the N (neutral), and tighten the parking brake, otherwise that the gearbox oil temperature, oil perishable.

2.Or high-speed driving downhill, the gear shift lever to the N coasting.

Some drivers to conserve fuel or downhill at high speeds, the shift lever to the sliding block N, which is likely to burn out the transmission.When the lower length of the glide slope is really necessary, shift lever can be held in a sliding block D, but not off the engine.

3.In the automatic transmission of the vehicle other than P or N range to start the engine.

Other than P or N range to start the engine, the engine can not operate, but it may burn transmission neutral start switch.Therefore, only P or N range to start the engine before starting the engine have to confirm whether the gear shift lever in the P or N.

4.Vehicle ramp does not use the parking brake when parking.

When the slope parking, the parking brake will not use a security risk, although with automatic transmission truck in the parking lock mechanism P position has generally little failure, but once the failure will result in accident.

5.As long as the D block off the vehicle, has stepped on the gas can change into high gear.

This approach is wrong.Because the shift operation should be “ahead of closing the throttle upshift, downshift throttle advance”.That it is, after the start block D, holding the throttle opening degree of 5%, accelerated to 40km / h, the throttle quick release, can be increased to a gear, and then accelerated to 75km / h, but also improve a loose throttle gear.When the vehicle speed decreases in the driving, the throttle slightly, i.e., back to the low speed.It must be noted, can not step on the accelerator in the end.Otherwise, will be forced low gear engaged, the transmission may cause damage.

 

 

A wrecker rescue vehicles belonging to the special purpose special vehicles.In principle, only be used wrecker rescue, normal patrol.There are special circumstances vehicles to be submitted to the approval of the captain.

Second, the wrecker driver’s hand is relatively fixed.The vehicle must be parked according to the provisions specified location?And to ensure safety.

Third, before each transfer should take the initiative to clean vehicles?To maintain a neat appearance.

Fourth, the wrecker shall not be parked in public places of entertainment.

Fifth, the driver of the vehicle must be truckried out every day before going to work out of the bus routine examination?Do daily vehicle maintenance?Ensure wrecker kept in good technical condition?Ensure driving safety.

Check the following:

1, to see the fuel, lubricant, coolant, battery fluid is normal?Brake (including the hand brake), the clutch is normal?

2, see the steering wheel, steering gear, steering shaft and is firmly connected straight horizontal rod valid?

3, see the tires (including the spare) pressure is normal?Tire screws are secure?Speakers, lights, wipers, warning lights, sound is normal?

4, look at the windows, door locks are normal?Lorry tools are complete?

5, look at a variety of instruments, warning lights are normally?Any abnormal sound engine sound?

6, to see whether the appearance of the truck clean?Whether traces of paint stripping collision damage?The truck is neat and clean?

Sixth, the daily vehicle traffic violation wrecker rescue work must not, must ensure road safety.Vehicles found problems, and timely report to the squadron leader.

Seven cases of vehicle insurance and the need for, overhaul, repair the squadron leader proposed plan before approval after repair.

Eight, vehicle management should be established archives: a truck a file.The establishment of vehicle use, maintenance, patients regularly check ledger.

IX should be wrecker axle tire uniformity in order to make the load on the tire uniformity wrecker axle load?It must be eliminated and the road surface is not perpendicular to the wheel plane phenomenon.The following methods can be used to remove or mitigate the phenomenon of tilting of the wheel: a shaft casing and the axle casing to improve (or spindle head) flexural rigidity. b pavement camber larger areas, in order to shift axle tire load and external wrecker be consistent, depending on the size of the crown, an appropriate increase in the outer gear wheel trailer axle air pressure used, but up to 10%.

Ten, should reduce the dynamic loads suffered by the tire is running, the following measures may be employed to reduce the negative dynamic tire during running: a reasonable choice of parameters of the structure of the semi-trailer, trailer frame so that, between the suspension and tire stiffness reasonable match, trailer to ensure good vibration characteristics, to reduce the impact load traveling..b improve road conditions?.C when the vehicle is traveling on uneven ground, due to lower driving speed.

Use lights:

Use wrecker warning lights provisions wrecker yellow warning lights into engineering (civil) andRed and blue(Police) in two colors, red and blue lights installed state regulations, relevant departments must apply for permits to use lights in the local and related forhorse powerties.

五十铃一拖一清障车 购车流程

FAQ:

1.Where your company?How do I order?

Answer: Our company is located in Suizhou, a majority of Isuzu CLW5041TQZQ5 a wrecker tow customers can come to our factory visits, satisfaction reorder; can also communicate good product, details and other issues through telephone sales staff, contract directly by fax.

2, your company with us there is no point of sale?We want to see how to do truck?
Answer: special trucks is different from trucks like the 4S shop set up sales companies in the Euro, which is decided by the special nature of the special vehicles.I use the company is now well-developed business network, customer orders as long as the call letter, truckried out in accordance with the truck purchase process announced.

The company will contract within the stipulated time frame will complete the forhorse powerties Isuzu CLW5041TQZQ5 a tow vehicle and a wrecker hands of the customer.We will be based on the actual needs of users, create high-quality, personalized private truck for each user, you are welcome to visit our company and product technology manufacturing strength, we will provide you with the best service!

 

3.Your production cycle to be long?

Answer: depending on the specific Isuzu CLW5041TQZQ5 a wrecker dragged the complexity and the number may be, under normal circumstances our production cycle is 10-15 days, customers in urgent need of such a vehicle, you can consult customer service vehicle sales is in stock.

 

4. Users outside your door you can send trucks?

Answer: Yes, my company truck flow requirements of customers can order online, signed a purchase contract.My company has a wealth of specialized transport fleet, is the experience of older drivers, the availability of skilled driving skills and professional special vehicle operations, delivery vehicles within the specified time to the designated locations, vehicle inspection qualified customers pay the full amount.Shipping costs shall be borne by the customer down payment.

 

5.Your payment is kind of how?

Answer: The two sides signed a formal contract, advance payment of 30% of the total under-production, post-paid balance vehicle inspection.Of course, Isuzu CLW5041TQZQ5 a drag after a wrecker do we will inform customers to the company vehicle inspection, if the customer is not convenient since the mention of our team appointed by the driver to take the truck, our house it delivered to the hands of users confirmed correct and then pay.

 

More Wrecker Wrecker models and pricing, please contact telephone 16607226615 Qi Jingli, we will provide you with the best service and the best price!

五十铃一拖一清障车 售后服务

 

Keywords:
Special Purpose Truck, Wrecker Truck , ,

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Message:

Verification:
5 + 8 = ?

Maybe you like also

  • Categories