The Isuzu 7-ton water tank fire truck adopts the Isuzu FVR series chassis QL1180XMFRY from Qingling Company. The whole vehicle consists of two parts: the fireman's cabin and the body. The cabin is changed from single row to double row, which can take 2+4 people. The car has a built-in tank structure, the front part of the body is the equipment box, the middle part is the water tank, and the rear part is the pump room. The liquid carrier tank is made of high-quality carbon steel and is elastically connected to the chassis. The volume of the water tank is 6.6 cubic meters. It is equipped with a CB10/40 low-pressure fire pump produced by Shanghai Rongshen Fire Equipment Co., Ltd., with a rated flow of 40L/S, and is installed on the roof. PS40W vehicle fire monitor produced by West Fire Machinery Co., Ltd. The biggest feature of the car is the large liquid carrying capacity, good maneuverability, low fuel consumption, and low maintenance costs in the later period. It can be widely used in public security fire brigade, factories and mines, enterprises and communities, docks and other places to fight general material fires.
Main parameters of Isuzu 7 ton water tank fire truck
Outside dimensions | 8080×2500×3470mm |
maximum total mass | 16800kg |
liquid carrier | 6600kg |
top speed | 90km/h |
Fire pump rated flow | 40L/s 1.0MPa |
Fire monitor rated flow | 40L/s 1.0MPa |
Fire cannon range | Water≥55m |
specific power | 177/45.7=3.87 |
Approach / departure angle | 15°/12° |
Main parameters of Isuzu 7 ton water tank fire truck
model | QL1180XMFRY |
manufacturer | Qingling Motor Co., Ltd. |
Engine rated power | 177kw |
engine capacity | 7790ml |
Engine Emission Standards | GB17691-2005 Country V |
drive form | 4×2 |
wheelbase | 4500mm |
Maximum allowable gross weight | 16800kg |
Minimum turning radius | ≤17m |
gearbox | manual |
power takeoff | Sandwich PTO |
Crew room Isuzu 7 ton water tank fire truck
structure | Flat head, four doors, remodeled double row |
number of passengers | 2+4 people |
driver's position | left |
equipment | The instrument panel of the original car is equipped with a fire operation instrument panel and a warning light control box.
|
Body structure and performance parameters
General arrangement | The whole vehicle is composed of two parts: the fireman's cabin and the body. The body layout adopts a built-in tank structure. The left and right sides are the equipment boxes, the middle is the water tank, and the rear of the equipment box is the pump room. |
![]() |
Equipment box and pump room
structure | The main frame structure is welded with high-quality square tube, and the outer decorative plate is welded with carbon steel plate. (Aluminum alloy square tube can be welded according to user needs) |
![]() |
equipment box | The equipment boxes are located on both sides of the rear of the passenger compartment, with aluminum alloy rolling shutter doors and lighting inside. There are storage boxes in the equipment box room according to the needs. There is a flip pedal on the lower part of the side. | |
pump room | The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutter doors on both sides and the back, with lights inside, and flipping pedals on the lower parts of both sides of the pump room. | |
Insulation location: install fuel heater (optional according to customer requirements) | ||
Ladder and car handle |
The rear climbing ladder is made of aluminum alloy two-section flip ladder. When used, the height should not exceed 350mm from the ground. The handle on the car adopts a grooved anti-skid round steel pipe on the surface, and the surface is sprayed with plastic. | ![]() |
jug
jug | ||
capacity | 6600kg |
![]() ![]() |
material | High-quality carbon steel with a thickness of 4mm ( stainless steel and PP material can be used according to user needs) | |
Tank fixing | Elastic connection with chassis frame | |
Tank Setup | Manhole: 1 manhole with a diameter of 460mm, with a quick locking/opening device | |
Overflow port: 1 DN65 overflow port | ||
Residual water outlet: set up a DN40 water tank to discharge residual water, with ball valve | ||
Water injection port: connect 1 DN65 port on the left and right sides of the water tank | ||
Water inlet and outlet: set 1 water tank to the water pump inlet pipe, DN125 valve, can be controlled by pneumatic and manual, set 1 water pump to the water tank filling pipe, DN65 valve, can be controlled by pneumatic and manual |
water system pump
model | CB10/40-RS type low pressure vehicle fire pump | ![]() |
form | low pressure centrifugal | |
Limited Data | 40L/s @1.0MPa | |
outlet pressure rating | 1.0MPa | |
maximum suction depth | 7m | |
water diversion device | Self-contained vane pump | |
Diversion time | Maximum suction depth≤50s |
piping system
Pipe material | High quality seamless steel pipe | ![]() |
suction line | There are 1 DN125 suction port on the left and right sides of the pump room | |
water injection line | There is one DN65 water injection port on the left and right sides of the water tank, and one DN65 water pump is installed in the pump room to inject water into the tank | |
outlet pipe | There is a DN80 water outlet on the left and right sides of the pump room, with a stop valve and a cover | |
Cooling water pipeline | Cooling water line and control valve with cooling power take-off |
Fire Extinguishing Device Vehicle Fire Monitor
model | PS40W | ![]() |
manufacturer | Chengdu West Fire Machinery Co., Ltd. | |
Rotation angle | 360° horizontal rotation | |
Maximum pitch/depression angle | Depression angle≤-15°, elevation angle≥+45° | |
flow | 40L/S | |
range | Water≥55m |
Fire control system <br>The control panel mainly includes two parts: cab control and pump room control
In-cab controls | Water pump disengagement, warning light alarm, lighting and signal device control, etc. | ![]() |
Pump room control | Bodywork main power switch, parameter display, status display |
Electrical Equipment
Additional electrical | independent circuit | ![]() ![]() ![]() |
Auxiliary lighting | The fireman's room, the water pump room and the equipment box are respectively equipped with lighting lamps, and the control panel is equipped with lighting and indicator lights, etc. | |
Strobe light | Red and blue strobe lights are installed on both sides of the body | |
warning device | Long row full red warning lights, mounted on the top of the cab | |
Siren with control box below driver front | ||
fire lighting | 1 35W fire searchlight installed at the rear of the upper body |
surface treatment
topcoat | High-quality domestic paint |
colour | The main color of the outer surface of the car is RO3 fire red |
Arrangement and equipment of vehicle-mounted fire fighting equipment
1. Equipment layout
1 | According to the actual needs of fire fighting, according to the fire fighting operation procedures, pick and place nearby. |
2 | Use special fixtures that are anti-corrosion, anti-vibration, anti-dropping, and anti-scratch. |
3 | Conspicuous marking, multi-person operation, non-interference. |
2. Equipment (standard)
1 | straw | 125×4 meters | 2 | root | threaded |
2 | water filter | FLF125 | 1 | piece | threaded |
3 | Trap | FII80/65×3-1.6 | 1 | piece | Internal button |
4 | water collector | JII125/65×2-1.0 | 1 | piece | Internal button |
5 | hose | 13-65-20 | 6 | plate | low pressure; internal button |
6 | hose | 13-80-20 | 6 | plate | low pressure; internal button |
7 | Reducer | KJ65/80 | 2 | piece | Internal button |
8 | Hose wrap | DT-SB | 4 | piece | |
9 | Hose hook | 4 | piece | ||
10 | Ground hydrant wrench | QT-DS1; length 400 | 1 | piece | |
11 | underground fire hydrant wrench | Long 860 | 1 | piece | |
12 | Suction wrench | FS100 | 2 | piece | |
13 | DC switch water gun | QZG3.5/7.5; 65 | 1 | branch | low pressure; internal button |
14 | DC Blossom Water Gun | QZK3.5/7.5; 65 | 1 | branch | low pressure; internal button |
15 | fire bucket | 1 | indivual | ||
16 | fire extinguisher | 3kg | 1 | Tool | |
17 | fire waist axe | Length 390; GF-285 | 1 | piece | |
18 | rubber hammer | 1 | piece | ||
19 | Rechargeable Portable Lights | 1 | piece |