Isuzu 1.5 ton small water tank fire truck is a small fire truck that can be driven with blue card and C license. The car adopts the original double cab chassis of Isuzu 100P series. Type 30 low-voltage vehicle-mounted fire pump and PS30 type fire water cannon have a range of more than 45 meters. Because of the small and flexible body and blue card, you can drive a fire truck with a small car. It is suitable for urban community micro fire stations, enterprises, factories, and townships. Emergency firefighting use,
The main technical parameters of Isuzu 1.5 ton water tank fire truck
|
Outside dimensions |
5490×1960×2940mm |
|
maximum total mass |
4360kg |
|
liquid carrier |
650kg |
|
top speed |
95km/h |
|
Fire pump rated flow |
30L/s 1.0MPa |
|
Fire monitor rated flow |
34L/s 1.0MPa |
|
Fire cannon range |
Water≥45m |
|
specific power |
88/4.36=20.18 |
|
Approach / departure angle |
24°/16° |
Main parameters of the chassis of Isuzu 1.5 ton water tank fire truck
| model | QL1040BUFWY |
| manufacturer | Qingling Isuzu (Chongqing) Engine Co., Ltd. |
| Engine rated power | 88kw |
| engine capacity | 2999ml |
| Engine Emission Standards | GB17691-2018 euro VI |
| drive form | 4×2 |
| wheelbase | 2765mm |
| Maximum allowable gross weight | 4495kg |
| Minimum turning radius | ≤6m |
| gearbox | manual |
| power takeoff | YTQ200 |
Vehicle fire pump of Isuzu 1.5 ton water tank fire truck
| model |
CB10/30 type low pressure vehicle fire pump |
|
|
form |
Atmospheric pressure centrifugal |
|
|
Limited Data |
30L/s @1.0MPa |
|
|
outlet pressure rating |
1.0MPa |
|
|
maximum suction depth |
7m |
|
|
water diversion device |
Self-contained vane pump |
|
|
Diversion time |
Maximum suction depth≤35s |
Vehicle fire water cannon in Isuzu 1.5 ton water tank fire truck
| model |
PS30 |
|
|
manufacturer |
Chengdu West Fire Machinery Co., Ltd. |
|
|
Rotation angle |
360° horizontal rotation |
|
|
Maximum pitch/depression angle |
Depression angle≤-15°, elevation angle≥+45° |
|
|
flow |
30L/S |
|
|
range |
≥45m |
Tank of Isuzu 1.5 ton water tank fire truck
|
capacity |
Water: 650kg (the maximum volume can be about 1.5 cubic meters) |
|
|
material |
High-quality carbon steel with a thickness of 3mm ( stainless steel and PP material can be used according to user needs ) |
|
| Tank fixing |
Elastic connection with chassis frame |
|
|
Tank Setup |
Manhole: 1 DN460 manhole with quick locking/opening device |
|
|
Overflow port: 1 DN65 overflow port |
||
|
Residual water outlet: set up a DN40 water tank to discharge residual water, with ball valve |
||
|
Water injection port: connect 1 DN65 port on the left and right sides of the water tank |
||
|
Water inlet and outlet: set 1 water tank to the water pump inlet pipe, DN100 valve, DN40 valve can be manually controlled, set 1 water pump to the water tank filling pipe, DN65 valve, can be manually controlled |
On-board equipment
