Howo 6 ton foam fire truck display video
| Sinotruk Howo 6-ton foam fire truck is refitted with Sinotruk Howo ZZ1167K501GE1 chassis. The whole vehicle is composed of two parts: the fireman's cabin and the body. The cabin is a modified double row, which can take 2+3 people. The car has a built-in tank structure. The front of the body is a water tank + equipment box, and the rear is a pump. House. The liquid carrier tank is made of high-quality carbon steel, and the interior is sprayed with epoxy primer and epoxy asphalt paint. It is elastically connected to the chassis. The water carrying capacity is 4000kg (PM50) and the foam liquid volume is 2000kg (PM50). It is equipped with Shanghai Xiongzhen Fire Fighting Equipment Co., Ltd. The company produces CB20.10/20.40-XZ type medium and low pressure fire pump, rated flow 40L/S, PH32 manual foam proportioning mixer, and PL32 vehicle fire monitor produced by Chengdu West Fire Machinery Co., Ltd. is installed on the roof. The biggest feature of the car is maneuverability, good handling and easy maintenance. It can be widely used in public security fire brigade, factories and mines, communities, docks and other places to fight large oil fires and general material fires. The fire performance of the whole vehicle meets the requirements of the GB7956-2014 standard; the chassis has passed the national compulsory product certification; the engine emission meets the requirements of the fifth stage limit of GB17691-2005 (National V standard); the whole vehicle has passed the inspection of the National Fire Equipment Quality Supervision and Inspection Center (Report No.: Zb201630559) and has been included in the Ministry of Industry and Information Technology's announcement of new automobile products, and the national compulsory product certification (CCCF certification) has been issued, which can be used for civilian licenses or military licenses. |
||||||||||
| Vehicle name: | Sinotruk Howo 6 ton foam fire truck | Vehicle model: | JDF5163GXFPM50 | Dimensions (mm): | 8625×2500×3640 | |||||
| Chassis model: | ZZ1167K501GE1 | engine: | Sinotruk 180hp/132kw (MC05.18-50) |
Tank volume: | 6 cubic meters (water tank 4 cubic meters, foam tank 2 cubic meters) | |||||
| Drive type: | 4×2 | Emission Standards: | Country V/Country V | The number of occupants in the cab: | 2+3 people | |||||
| Number of axes: | 2 | Front track: | 1930, 1960, 2045mm | Tire specifications: | 10.00R20, 10.00-20, 9.00R20 | |||||
| Wheelbase: | 4500mm | Rear Track: | 1800,1860,1860mm | Number of leaf springs: | 11/9+8,3/9+8,3/3+2 | |||||
| Axle load: | 5710/9810kg | Maximum speed: | 90km/h | Anti-lock braking system: | have | |||||
| front suspension/rear suspension | 1430/2495mm | Number of tires: | 6 | Approaching departure angle: | 14/12° | |||||
| Total mass: | 15520kg | Rated quality: | 4900kg | Curb weight: | 10245kg | |||||
| other: | Braking system: service brake system, dual-circuit air brake: parking brake, spring energy storage air brake: auxiliary brake, engine exhaust brake. | |||||||||
| Overall layout: The whole vehicle is composed of two parts: the fireman's cabin and the body. The body layout adopts an integral frame structure, with a water tank inside, equipment boxes on both sides, and a water pump room at the rear. The tank body is a parallel cuboid box tank. . | ||||||||||
| power takeoff | structure and form | Integral box type, full power, sandwich type, forced adjustable circulating water cooling, splash oil lubrication | ||||||||
| cab | Structure type | The overall four-door double-row flat head, additional crew room, can take a total of 5 people, the driver's position is on the left | ||||||||
| Equipped with firefighting facilities | The dashboard of the original car is equipped with a fire control panel and a warning light control box, and 1. an alarm; 2. a power take-off control switch and indicator light; 3. an additional power switch; | |||||||||
| equipment box | structure and form | The main frame structure is welded with high-quality square tube, and the outer decorative plate is welded with carbon steel plate. (Aluminum alloy square tube can be welded according to user needs) | ||||||||
| equipment box | The equipment box is located at the rear of the passenger compartment, with aluminum alloy rolling shutter doors on both sides and lighting inside. There are storage boxes in the equipment box room according to the needs. | |||||||||
| container | material | High-quality carbon steel with a thickness of 4mm (stainless steel and PP material can be used according to user needs) | ||||||||
| jug | Manhole: 1 DN460 manhole with quick locking/opening device Connect 1 DN65 port on the left and right sides to the water inlet and outlet: set a water tank to the water pump inlet pipe, DN100 valve, which can be controlled by pneumatic and manual, set a water pump to the water tank filling pipe, DN50 valve, can be controlled by pneumatic and manual | |||||||||
| foam tank | Manhole: 1 DN460 manhole with quick locking/opening, automatic pressure relief device : Set 1 DN40 foam tank to pump out foam pipe | |||||||||
| volume | Water tank: 4000kg Foam tank: 2000kg | |||||||||
| pump room | structure and form | The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutters on both sides and the back, with lighting inside, and some common equipment can be placed on both sides of the pump room | ||||||||
| Equipped with firefighting facilities | Water filters, water collectors, water separators, water guns, reducing joints, suction pipe wrenches, etc., can also be added according to special needs: such as hand-lifted motor pumps, fuel heaters, etc. | |||||||||
| ladder | Ladder and car handle | The rear climbing ladder is made of aluminum alloy with two sections, and the height of the ladder is not more than 350mm. | ||||||||
| Fire Pump | model | CB20.10/20.40 type medium and low pressure fire pump for vehicles | ||||||||
| Structure and Performance | structure | Atmospheric pressure centrifugal | ||||||||
| performance | low pressure | 40L/s @1.0MPa | Water diversion time ≤35 The maximum suction depth is 7m | |||||||
| medium pressure | 20L/s @2.0MPa | |||||||||
| water diversion device | Self-contained vane pump | |||||||||
| fire monitor | model | PL32 | range | Foam≥45m Water≥50m | ||||||
| flow | 32L/S | |||||||||
| Maximum pitch/depression angle | : Depression angle≤-15°, Elevation angle≥+45° | |||||||||
| Rotation angle | Water and foam dual-purpose fire monitor, 360° horizontal rotation | |||||||||
| piping system | Pipe material | High quality seamless steel pipe | ||||||||
| suction line | There is a DN125 suction port on the back of the pump room | |||||||||
| water injection line | There is a DN65 water injection port on the left and right sides of the water tank, and a DN40 water pump is installed in the pump room to inject water into the tank | |||||||||
| outlet pipe | There are 1 DN65 and 1 DN80 water outlet on the left and right sides of the pump room, with stop valve and cover | |||||||||
| Cooling water pipeline | Cooling water line and control valve with cooling power take-off | |||||||||
| Electrical system | Additional electrical | independent circuit | ||||||||
| Auxiliary lighting | The fireman's room, the water pump room and the equipment box are respectively equipped with lighting lamps, and the control panel is equipped with lighting and indicator lights, etc. | |||||||||
| Strobe light | Red and blue strobe lights are installed on both sides of the body | |||||||||
| warning device | A long row of full red warning lights is installed on the top of the cab. Siren with control box below driver front | |||||||||
| fire lighting | 1 35W fire searchlight installed at the rear of the upper body | |||||||||
| control system | In-cab controls | Water pump disengagement, warning light alarm, lighting and signal device control, etc. | ||||||||
| Pump room control | Bodywork main power switch, parameter display, status display | |||||||||
| Optional part | With sprinkler function: front flush, rear sprinkler; roof tail lights; standard CB10/40 normal pressure pump, optional CB20.10/20.40 medium and low pressure pump, etc. | |||||||||
| serial number | name | Specification | quantity | unit | Remark |
| 1 | straw | 125×4 meters | 2 | root | threaded |
| 2 | water filter | FLF125 | 1 | piece | threaded |
| 3 | Trap | FII80/65×3-1.6 | 1 | piece | Internal button |
| 4 | water collector | JII125/65×2-1.0 | 1 | piece | Internal button |
| 5 | hose | 13-65-20 | 6 | plate | low pressure; internal button |
| 6 | hose | 13-80-20 | 6 | plate | low pressure; internal button |
| 7 | Reducer | KJ65/80 | 2 | piece | Internal button |
| 8 | Hose wrap | DT-SB | 4 | piece | |
| 9 | Hose hook | 4 | piece | ||
| 10 | Ground hydrant wrench | QT-DS1; length 400 | 1 | piece | |
| 11 | underground fire hydrant wrench | Long 860 | 1 | piece | |
| 12 | Suction wrench | FS100 | 2 | piece | |
| 13 | DC switch water gun | QZG3.5/7.5; 65 | 1 | branch | low pressure; internal button |
| 14 | DC Blossom Water Gun | QZK3.5/7.5; 65 | 1 | branch | low pressure; internal button |
| 15 | foam gun | PQ4/0.7Z | 1 | branch | |
| 16 | foam pipette | 40*2700 | 1 | piece | |
| 17 | fire bucket | 1 | indivual | ||
| 18 | fire extinguisher | 3㎏ | 1 | Tool | |
| 19 | fire waist axe | Length 390; GF-285 | 1 | piece | |
| 20 | rubber hammer | 1 | piece | ||
| twenty one | Rechargeable Portable Lights | 1 | piece |
| serial number | name | Specification | quantity | unit | Remark |
| 1 | automatic charging device | 24V | 1 | set | |
| 2 | backrest | 3 | set | ||
| 3 | air respirator | number of members | set | ||
| 4 | water hose bridge | rubber | 2 | vice | |
| 5 | Telescopic Ladder | 1 | vice | ||
| 6 | Hand pump | 1 | tower | ||
| 7 | Demolition tool | 1 | set | ||
| 8 | Other fire fighting equipment |
Welcome to Chengli Special Automobile Co.,Ltd, any questions contact us via: sales@chengli.co