Parameter configuration table and picture display of FAW 8X4 chemical liquid transport vehicles (18 tons and 20 tons)
Eight ammonia water before and after the liberationChemical liquid truckIt is suitable for transporting all kinds of gasoline, diesel, vegetable oil, kerosene, ethanol, methanol, hydrochloric acid, sulfuric acid, sodium hypochlorite, benzene, aldehyde, hydrogen peroxide aqueous solution, ammonium nitrate solution and other categories three, eight, two and so on.
Chassis configuration
Qingdao Han V high-roof cab, Xichai 240 horsepower, Shaanxi Gear 8-speed, 11.00R20 steel tires, wheelbase 1900+4160+1350, 457 rear axle, front disc, ABS, speed limit, air conditioning
Transport mediumSuitable for transportation of various gasoline, diesel, vegetable oil, kerosene, ethanol, methanol, hydrochloric acid, sulfuric acid, sodium hypochlorite, benzene, aldehyde, mysteryHydrogen peroxide aqueous solution, ammonium nitrate solution and other categories three, eight, two and so on.
Vehicle advantage
FAW FAWChassis is a big brand, nationwide after-sales warranty, long service life of the tank body, strong cold resistance of the engine, and formal procedures are issued nationwide to assist in listing.
Tank configuration: The tank adopts Wuhan Iron and Steel Company's Q235 high-quality tank body Euro standard 6mm, head 7mm truck bon steel sheet, one-time rolling and forming, completely seamless forming. The tank body is equipped with multiple anti-wave partitions and uses high-pressure gas Leak test detection, so that the tank has the characteristics of high strength, stable center of gravity, safe and stable vehicle transportation. The whole tank is divided into single warehouse or multiple warehouses. The warehouse can be divided into chambers. The lower end of the intermediate partition has a through hole, and the middle of each warehouse is welded. The warehouse strengthens the wave partition to reduce the impact of the oil in the tank and increase the rigidity of the tank when the truck is driving. The outside of the plastic-lined tank is made of high-quality 6mm truck bon steel, and the plastic-lined part is made of 16mm polyethylene material at one time. , Durable, the surface of the tank is coated with anti-rust paint and decorative paint. The tank body and each bumper are pasted with red and white visual reflective strips, the two sides of the tank body are pasted with the word "corrosion", and the top tank mouth is equipped with a breathing valve. Anticorrosive tank mouth, the bottom of the tank body is equipped with an emergency shut-off device subsea valve, and the tank body is equipped with a folding guard rail for more safety.
Performance description: The chassis is equipped with speed limiting device in strict accordance with Euro requirements, ABS brake anti-lock device, exhaust pipe front, tank mouth is made of steel lining plastic, durable, equipped with pp ball valve, climbing ladder and protective railing at the rear, guarantee To be safe, Chengli special truck is indispensable if you want to do a good business. What you buy is quality, and what you buy is assured.
【The main technical parameters】 | |||
Product trademark | Cheng Liwei | Announcement batch | 275 |
product name | Corrosive goods tank truck | Product number | CLW5317GFWC4 tank transporter for corrosive materials |
Total mass (Kg) | 31000 | Tank volume (m3) | 19.0 |
Rated load quality (Kg) | 15955,16020 | Dimensions (mm) | 11900×2500×3454 |
Curb weight (Kg) | 14,850 | Cargo compartment size (mm) | ×× |
Rated passengers (person) | Total mass of semi-trailer (Kg) | ||
The number of passengers in the cab (person) | 3,2 | Load quality utilization factor | |
Approach angle/departure angle (°) | 18/10 | Front suspension/rear suspension (mm) | 1400/2650 |
Number of axes | 4 | Wheelbase (mm) | 1950+4550+1350 |
Axle load (Kg) | 6500/6500/18000(Parallel with double shaft) | Maximum speed (Km/h) | 79 |
other | Remarks: effective volume of tank: 19.0 cubic meters meters, medium: ammonia, item number: 8; density: 880 kg/ cubic meters meter, tank dimensions (length×diameter) (mm): 9000×Φ1800 (straight line length 8500 ). The cab is optional with the chassis, protective material: Q235A truck bon steel, connection method: the left and right sides and the rear lower part of the protection are welded, the rear protection section size (mm): 100×50, the rear protection ground height (mm) :480, only use chassis radial tires and a chassis with ABS, install a driving recorder with satellite positioning function, the truck only uses BF6M1013-24E4, BF6M1013-26E4, BF6M1013-28E4 engines, the corresponding fuel consumption value is (L/100km ): 40.38,41.44,42.4. ABS system manufacturer 1: Zhejiang Wanan Technology Co., Ltd., model: VIE ABS-Ⅱ, ABS system manufacturer 2: WABCO, model: 4460043200. | ||
【Chassis technical parameters】 | |||
Chassis model | CA5310GYYP63K1L6T4E4 | Chassis name | Oil truck chassis |
Brand name | FAW truck d | manufacturer | China FAW Group Corporation |
Dimensions (mm) | 11650×2495×3454,2896 | Number of tires | 12 |
Approach angle/departure angle (°) | 18/16 | Tire specifications | 10.00-20,10.00R20,11.00-20 16PR,11.00R20 16PR,12R22.5 16PR |
Number of leaf spring | 3/3/11,10/10/11,3/3/4 | Front track (mm) | 1950/1950 |
Fuel type | Diesel oil | Rear track (mm) | 1847/1847 |
Emission Standards | GB3847-2005, GB17691-2005 Euro IV | ||
engine model | Engine manufacturer | Displacement (ml) | Power (Kw) |
BF6M1013-28E4 | China FAW Group Corporation | 7146 | 209 |