FAW 6×4 asphalt truck

After FAW, the double-bridge asphalt truck was used for long, medium and short distance transportation of liquid asphalt. The truck adopts automatic ignition diesel burner for heating and heat preservation. It has the functions of asphalt self-flow unloading, or pump pressure unloading, pumping tanking, and in-situ transportation. The truck has good heat preservation, large truck rying capacity and strong adaptability.

After FAW, the double-bridge asphalt transporter is suitable for various operating conditions, with strong bearing capacity and comfortable driving; small turning radius; the tank has a trapezoidal cross-section, large volume, low center of gravity, and compact structure; the asphalt tank is equipped with a heating system and is equipped with Imported diesel burner, good combustion quality, no pollution;

After FAW, the double-bridge asphalt truck can also choose to have an asphalt pump. The pump uses a unique heat-conducting oil system to heat and keep the asphalt pumps and valves; the multifunctional pumping system can meet various needs in asphalt transportation. Self-flow unloading: when the oil storage tank is lower than the asphalt truck, it can be directly discharged by itself; pressure discharge: when the oil storage pool is higher than the asphalt truck, it is pumped under pressure; self-pump suction: it can be discharged through its own oil discharge pipe The asphalt in the thermal insulation tank or oil storage tank is sucked into the vehicle without an external pump; internal circulation: during the asphalt heating process, internal circulation can be truck ried out to improve the quality of asphalt heating; external pump input: asphalt can be injected through the tank top manhole.

After the FAW of the double-axle asphalt transporter, the asphalt transporter can also choose to use the hydraulic system to drive the asphalt pump and the heat transfer oil pump, which is reliable in transmission and easy to operate; users can choose to install a full-course display of the liquid level and a full-level alarm system to facilitate the asphalt level in the tank Highly controlled system.
FAW Asphalt Transporter Vehicle Configuration

After the FAW, the double-axle asphalt transporter chassis configuration: 6X4 drive, flat-top double-row cab, Xichai CA6DE3-22E3 engine, total mass: 25000, overall dimensions (mm): 10200×2495×3350, maximum speed (km/ h): 85, tires: 10.00-20 steel tires, Shaanxi Gear 9-speed gearbox, front axle: 7.5T, rear axle: 13T, semi-suspended cab rear suspension, hydraulic and mechanical flip cab.