Dongfeng Tuyi double drainage tank fire truck , vehicle model: JDF5040GXFSG10/E6 water tank fire truck, modified with Dongfeng EQ1040D16DC chassis. The whole vehicle is composed of two parts: the fireman's cabin and the body. The cabin is an original double row, which can take 2+3 people. The car is of an exposed tank structure. The front of the body is a water tank and the rear is a pump room. The liquid carrier tank is made of high-quality carbon steel, bolted to the chassis, carrying 975kg of water, equipped with a CB10/20-XZ fire pump produced by Shanghai Xiongzhen Fire Equipment Co., Ltd., with a rated flow of 20L/S, and installed on the roof of Chengdu Weiss PS20W vehicle fire monitor produced by Special Fire Machinery Co., Ltd. The vehicle has a compact structure, complete configuration, and strong mobility. It can respond to fires in enterprises, communities or key firefighting units in a timely manner, and can form a small combat force for initial fire fighting and personnel evacuation. It can be widely used in fire rescue stations, government full-time fire brigade, enterprise full-time fire brigade, etc.
The fire performance of the whole vehicle meets the requirements of the GB7956-2014 standard; the chassis has passed the national compulsory product certification; the engine emission meets the requirements of the sixth stage limit of GB17691-2018 ( euro VI standard); the whole vehicle has passed the inspection of the euro Fire Equipment Quality Supervision and Inspection Center , and has been included in the Ministry of Industry and Information Technology's announcement of new automotive products.
Main parameters of the vehicle
Outside dimensions | 5750×1750×2550mm |
maximum total mass | 4350kg |
liquid carrier | Water: 975kg |
top speed | 100km/h |
Fire pump rated flow | 20L/s 1.0MPa |
Fire monitor rated flow | 20L/s 1.0MPa |
Fire cannon range | Water≥50m |
specific power | 70/4.35=16.1 |
Approach / departure angle | 21°/17° |
Main parameters of the chassis
model | EQ1040D16DC |
manufacturer | Dongfeng Motor Co., Ltd. |
Engine rated power | 70kw |
engine capacity | 2300ml |
Engine Emission Standards | GB17691-2018 euro VI |
drive form | 4×2 |
wheelbase | 3000mm |
Maximum allowable gross weight | 4495kg |
Minimum turning radius | ≤6m |
gearbox | manual |
power takeoff | Sandwich PTO |
Vehicle fire pump
model | CB10/20-XZ type low pressure vehicle fire pump | ![]() |
form | Atmospheric pressure centrifugal | |
Limited Data | 20L/s @1.0MPa | |
outlet pressure rating | 1.0MPa | |
maximum suction depth | 7m | |
water diversion device | Piston Vacuum Pump | |
Diversion time | Maximum suction depth≤35s |
Vehicle fire water cannon
model | PS20W | ![]() |
manufacturer | Chengdu West Fire Machinery Co., Ltd. | |
Rotation angle | 360° horizontal rotation | |
Maximum pitch/depression angle | Depression angle≤-15°, elevation angle≥+45° | |
flow | 20L/S | |
range | Water: ≥50m |
fire water tank
capacity | Water: 975kg | ![]() |
material | High-quality carbon steel with a thickness of 3mm ( stainless steel and PP material can be used according to user needs ) | |
structure | The built-in tank is equipped with vertical and horizontal wave-proof boards, with manholes in the middle, trapezoidal folded ribs to increase the strength of the head and clapboard, and the top plate is reinforced with angle iron. The water tank can withstand a hydrostatic pressure of 0.1 MPa. 0.1 MPa hydrostatic strength test, there is no obvious residual deformation on both sides of the tank, and the overall anti-corrosion treatment | |
Tank fixing | Bolted connection to chassis frame | |
Tank Setup | Manhole: 1 DN460 manhole with quick locking/opening device | |
Overflow port: 1 DN65 overflow port | ||
Residual water outlet: set up a DN40 water tank to discharge residual water, with ball valve | ||
Water injection port: connect 1 DN65 port on the left and right sides of the water tank | ||
Water inlet and outlet: set 1 water tank to the water pump inlet pipe, DN100 valve, set 1 water pump to the water tank filling pipe, DN65 valve, manual control |
Equipment box and pump room
structure | The main frame structure is welded with high-quality square tubes, and the outer decorative panels are welded with carbon steel plates. The roof is non-slip and can be walked. | ![]() |
equipment box | The equipment box is located on both sides of the pump room, and there are aluminum alloy rolling shutter doors on both sides, and there are lights inside. | |
pump room | The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutters on both sides and the back, with lights inside, and some common equipment can be placed on both sides of the pump room | |
Insulation location: install fuel heater (optional according to customer requirements) | ||
Ladder and car handle | The rear climbing ladder is made of aluminum alloy two-section flip ladder. When used, the height should not exceed 450mm from the ground. The handle on the car adopts a grooved anti-skid round steel pipe on the surface, and the surface is sprayed with plastic. |
On-board equipment village (18 pieces)
1 | straw | 100×2 meters | 4 | root | threaded |
2 | water filter | FLF100 | 1 | piece | threaded |
3 | Trap | FII80/65×2-1.6 | 1 | piece | Internal button |
4 | water collector | JII100/65×2-1.0 | 1 | piece | Internal button |
5 | hose | 13-65-20 | 8 | plate | low pressure; internal button |
6 | Reducer | KJ65/80 | 2 | piece | Internal button |
7 | Hose wrap | DT-SB | 4 | piece | |
8 | Hose hook | 4 | piece | ||
9 | above ground hydrant wrench | QT-DS1; length 400 | 1 | piece | |
10 | underground fire hydrant wrench | Long 860 | 1 | piece | |
11 | Suction wrench | FS100 | 2 | piece | |
12 | DC switch water gun | QZG3.5/7.5; 65 | 1 | branch | low pressure; internal button |
13 | DC Blossom Water Gun | QZK3.5/7.5; 65 | 1 | branch | low pressure; internal button |
14 | fire bucket | 1 | indivual | ||
15 | fire extinguisher | 3㎏ | 1 | Tool | |
16 | fire waist axe | Length 390; GF-285 | 1 | piece | |
17 | rubber hammer | 1 | piece | ||
18 | Rechargeable Portable Lights | 1 | piece |
