China Trucks maker and designer
Mail: sales@cl-spv.com
EnglishالعربيةবাংলাFrançaisDeutschItalianoPortuguêsРусскийEspañolاردو

Bulk feed truck

» Van Box Truck » Bulk feed truck

Dongfeng Tianlong 32 cubic bulk feed truck

Parameter configuration table and picture display of Dongfeng Tianlong 32 cubic bulk feed truck

Dongfeng Tianlong bulk feed transporter with four and eight 45 cubic meters in the front, vehicle model: CLW5310ZSLD3, chassis model: DFL1311A3, adopts the original Dongfeng Tianlong chassis, 8×4 drive, D310 flat head, one row and half high roof double cab, Dongfeng Cummins 260 horsepower EGR (EGR is a large pump + exhaust gas circulation engine, some cities with strict emission standards cannot be registered) or 290 horsepower electronic injection (electric injection is a high-pressure common rail engine, authentic Euro three emission standards) intercooled supercharged engine, equipped with electricity Heating (glow plug) cold start device, all-steel 350L main fuel tank, Φ430mm push diaphragm spring clutch, Shaanxi gear 9-speed gearbox, 5 tons double front axle, 10 tons double rear axle, 300×90×(8 +6) mm double-layer girder, 11.00R20 steel wire tires, full-floating cab front and rear suspension, hydraulic flip, electric glass lifter, central locking, with air conditioning.
The effective volume of the bulk feed tank is 45 cubic meters (depending on the density of the feed, it can load 22.5-27 tons of feed). The material is conveyed in the form of an electric auger. It can be operated by plugging in 380 volts electricity. The electric motor drives the mechanical screw way to discharge and unload. The material speed is fast and can be operated continuously, which greatly improves the production efficiency. The standard of the tank body is a three-storey structure, which can load three different feeds at the same time; each part has a simple structure, and the integrated electronic control operation box is located at the end of the tank body. The operation mode is clear at a glance, the operation is convenient and flexible, and the maintenance is easy

Cheng Liwei CLW5310ZSLD3 Technical Parameters Bulk feed truck

Product trademark

Cheng Liwei

东风天龙32立方散装饲料运输车

Vehicle name

Bulk feed truck

Vehicle model

CLW5310ZSLD3

Exemption Notice/ Exemption Notice

No / no

Fuel bulletin / environmental protection bulletin

No / no

company address

Hubei Suizhou southern suburbs Cheng Li Automobile Industry Park

Manufacturer

Chengli Special Automobile Co., Ltd

Announcement batch / release date

2001o4 244/20130118

Catalog number / product number

(17) 74/ZKEZE41B01U

engine model

ISDe270 30

ISDe245 30

ISLe290 30

L270 30

L290 30

C245 33

C260 33

YC 6L 270-33

dCi290-30

Engine manufacturer

Dongfeng Cummins Engine Co., Ltd.

Dongfeng Cummins Engine Co., Ltd.

Dongfeng Cummins Engine Co., Ltd.

Dongfeng Cummins Engine Co., Ltd.

Dongfeng Cummins Engine Co., Ltd.

Dongfeng Cummins Engine Co., Ltd.

Dongfeng Cummins Engine Co., Ltd.

Guangxi Yuchai Machinery Co., Ltd.

Dongfeng Motor Corporation Ltd

engine capacity

6700

6700

8900

8900

8900

8300

8300

8424

11120

Engine power

198

180

213

199

213

180

191

199

213

Dimensions (length / width / height)

12000 × 2500 × 3995

Cargo compartment (length/width/height)

× ×

Total mass (Kg)

31000

Load quality utilization factor

Curb weight (kg)

15600

Rated load (kg)

15205,15270

Rated passengers (person)

Front passenger (person)

3,2

Approach / departure angle

28/10, 28/9.5, 28/9, 28/8, 28/7

Front suspension / rear suspension

1460/2660,1460/2740,1460/2790,

1460/2990,1460/3040

Wheelbase (mm)

1950+4250+1300, 1950+4250+1350,

1950+4500+1300, 1950+4500+1350,

1950+4500+1430,1850+4600+1430,

1850+4600+1350

Axle load

6500/6500/18000 (Parallel with double shaft)

Number of axes

4

Number of springs

8/8/10 ,3/3/4,9/9/10

Number of tires

12

Tire specifications

10.00-20,10.00R20,11.00-20,11.00R20,295/80R22.5

Front track

1940/1940, 1986/1986, 2040/2040

Rear track

1860/1860

Steering Type

steering wheel

Maximum speed

85

Semi-trailer saddle

Total mass of trailer

Identification code

LGAX 5C 65×××××××××

LGAX5D65×××××××××

According to the standard

GB3847-2005, GB17691-2005 Euro III GB3847-2005, GB17691-2005 Euro III

Chassis model

DFL 1311A 3

other

The name of the transported medium: extruded and pelleted feed, powder; the density of the medium: 500 kg/m3, the effective volume of the tank: 31.9 m3, the rated load capacity of 15270 kg corresponds to 2 passengers in the cab, and the rated load capacity of 15205 kg corresponds to the cab There are 3 passengers. Overall dimensions of tank (mm): 9200×2495×2300. Wheelbase (mm): 1850+4600+1430, 1950+4500+1430, corresponding to rear overhang (mm): 2660; Wheelbase (mm): 1950+4500+1350, corresponding to rear overhang (mm): 2740; Wheelbase (mm): 1950+4500+1300, corresponding to rear overhang (mm): 2790; wheelbase (mm): 1950+4250+1350, corresponding to rear overhang (mm): 2990; wheelbase (mm): 1950+4250+ 1300, corresponding to the rear overhang (mm): 3040. Protective material: Q 235A truck bon steel, connection method: The left and right sides and the rear lower protection are all welded together, the rear protective section size (mm): 100×50×5, the rear protective ground height (mm): 520. This truck only chooses to use: C260 33, L290 30, ISLe290 30, ISDe270 30, L270 30 engine. Optional flat-top cab, optional rear-view mirror, optional front-down mirror installation location.

contact details

Contact: Manager Jiang Tel: +86 18872992009(Wechat&Whatsapp) Fax: 0722-3588620

东风天龙32立方散装饲料运输车

东风天龙32立方散装饲料运输车

Keywords:
Bulk feed truck , , , ,

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Phone:
*
Messenger:
*
Message:

Verification:
3 + 9 = ?

Maybe you like also

  • Categories