Dongfeng Tianlong 20 tons bulk feed transporter

Comments
Excerpt
Dongfeng Tianlong uses Dongfeng Cummins 315 horsepower engine for the first four and eighth bulk feed trucks . This 20-ton (40 m3) bulk feed truck fully meets the national emission requirements, and there is no problem with households all over the country. Please rest assured to buy.

Parameter configuration table and picture display of Dongfeng Tianlong 20-ton bulk feed truck

Dongfeng Tianlong 20 tons bulk feed transporter

Dongfeng Tianlong (first four and last eight) bulk feed truck , with a volume of 40 cubic meters meters and a capacity of 20-25 tons

The effective volume is 40 cubic meters meters, which can hold 20 tons. It is equipped with 4 warehouses as standard. The electric screw auger discharges, the discharge pipe is inclined 70 degrees, and the vertical discharge height is 8.5 meters. It takes 35 minutes for the whole vehicle to discharge.
Chassis configuration: Dongfeng Tianlong original chassis, new luxury with sleeping cab, Cummins 315 horsepower engine, Shantou 12-speed gearbox, dual 5 tons front axle, 10 tons rear axle, double girder, 11.00R20 steel wire tires, 1850+4600 +1350mm wheelbase, with original air conditioner.  Optional: 270-292-315 horsepower engine.

The working principle of the bulk feed transport vehicle : electric screw auger, 380V external power supply, the tank body is welded by cold-rolled steel plate, can be made of various tonnage tank volume according to user requirements, the tank body volume can be up to 40 cubic meters meters, the tank body The standard configuration is divided into three independent compartments.

Dedicated configuration:

The standard tank is made of truck bon steel, the tank volume is 40 cbm tanks, and the standard is divided into 4 independent compartments.

Three-phase 380V electric screw auger is used for unloading, and the unloading speed is 1 cubic meters meter or more than 0.6 tons per minute.

The discharge height is about 8.5 meters, which fully meets the filling needs of the feed tower of the breeding base!

Corporate trademark Cheng Liwei   product name   Tianlong 20 tons feed truck   Emission Standards Diesel oil
Vehicle model CLW5311ZSLD5 Chassis model   DFH1310A1 engine capacity 6700
engine model Cumming ISL9.5-315E51A Engine power 232KW 315 horsepower   Total mass (KG)  31000
  Wheelbase (mm) 1850+4600+1350 Gearbox Shaanxi 12 gears   Rated mass (KG) 15300
  Number of tires   12 front 4 rear 8 Tire specifications 11.00R20 steel wire tire Curb weight (KG) 15505

Vehicle size (mm )

12000*2500*3995 Maximum speed 98 Announcement date 20161028
Tank volume 40 cubic meters meters Unloading speed  500-600 kg/min
Vehicle unloading time 35 minutes Maximum elevation angle of discharge 70 degrees
Horizontal conveying distance 6.5 meters Unloading rotation angle 180 degrees on one side
Vertical conveying distance 8.3 meters Tank compartment

The standard configuration is divided into four warehouses, and 4 different feeds are loaded at the same time

Modification configuration: The tank body is made of special volume plates of Wuhan Iron and Steel, which can be 40 cubic meters meters according to user requirements. It can be divided into multiple bins for loading and unloading a variety of different feeds. The electric auger type (three-phase electric Supporting place) or hydraulic auger type (no three-phase electric place).

It is conveyed by auger (rotating blades), horizontal auger (feeding 273mm at the bottom of the horizontal tank), vertical auger (feeding 273mm), movable auger (feeding 219mm at the top) can rotate 180 degrees on one side and lift up and down. Unloading speed: 500-600 kg/min, the unloading time of the whole vehicle is about 20 minutes. The unloading horizontal distance is 6.5 meters, and the vertical distance is more than 8.3 meters. A remote control can be installed, and the individual can complete the operation independently, and rotate or lift freely.

The electric auger-type bulk feed truck is a new product newly developed for different customer groups to meet the low-end market. The electric auger is connected to a three-phase 380V for power supply. The truck is highly cost-effective and is favored by customers. It adopts a mechanical screw unloading method, which has a fast unloading speed and continuous operation, which greatly improves production efficiency.

Optional 1 : The original truck engine generates electricity, (easy to use, no external power supply required)

Optional: remote control system, complete individual operation independently.

Bulk feed trucks are mainly used to transport finished bulk feed products or raw feed production grains from feed mills to livestock farms and poultry farms and feed processing users. At the same time, it can also be used to transport certain non-corrosive powder and granular materials, such as powder and Grain depot turnover. The tank body of the bulk feed transporter can be divided into 4-5 bins, which can be divided into different types of feed, and each bin can be loaded and unloaded independently, which can save customers a lot of packaging and labor costs. The operation is simple and can be divided into hydraulic and electric power.
Dongfeng Tianlong 20 tons bulk feed transporter

Dongfeng Tianlong 20 tons bulk feed transporter

Dongfeng Tianlong 20 tons bulk feed transporter

Dongfeng Tianlong 20 tons bulk feed transporter

 

Warm reminder: 1. The density of various feeds is different, and the tonnage of loading and unloading is different. The total volume of the tank is 40 cubic meters meters, and the feed density is: 0.55, 0.6, 0.7, and the load capacity is 22T, 24T.

2. Using Tianjin chassis, suitable for long-distance transportation, large-scale feed factory.

3. The speed of different feed conveying methods is different, please choose according to the actual place. Electric or hydraulic.

4. Production date: 10 working days.

Complete vehicle procedures: complete vehicle qualification certificate, chassis qualification certificate, vehicle registration invoice, vehicle-mounted tools, vehicle quality assurance manual, Euro service station directory, etc.

Welcome to Chengli Special Automobile Co.,Ltd, any questions contact us via: sales@chengli.co
匿名

Comment

Anonymous Write