Parameter configuration table and picture display of the special multifunctional dust suppression vehicle for Dongfeng Tianjin Railway
Dongfeng Tianjin Railway Dedicated Multifunctional dust suppression vehicle Curing agent Dust suppression truck ,Boom type Dust suppression truck , Folding arm dust suppression vehicle, railway dust suppression Spray truck It belongs to a kind of dust suppression curing agent spraying device at coal loading point, mainly serving iron, road and other fields. When the train transports coal, the wind is strong, coal dust falls on both sides of the railway with the wind, and the dust accumulates in the railway tunnel, endangering driving safety. The spray-rod dust suppression vehicle can solidify the coal passing through each train. A protective film is formed to reduce pollution and can effectively suppress accidents caused by coal dust combustion in railway tunnels.

[Upper configuration]: The tank body is a 10- cubic meters round tank with anti-corrosion inside the tank body, front flushing, back spraying, side spraying, anti-aircraft gun, and dust suppression spraying rod (with rotating telescopic function). The spraying rod is 3.5-5 meters above the ground, the rear platform is equipped with an 8KW auxiliary generator set, and two 1.5KW electric motors (with stirring function) are added to the tank body. The tank body is painted white and small , and the platform and spraying rod are small . The remotely operated spraying rod rotates up and down, and the electric control box is installed on the rear platform.
[Spray device]: Spray pressure: 2.0-4.0mpa, uniform spray volume: 2L/m3 when the vehicle speed is 10km, spray arm: 4-6 meters, spray arm lift: 3.5-5 meters, control device: remote control, hand-aired Kind, high-pressure pump: driven by power take-off, flow control: automobile throttle control, rotation angle: 180 degrees, spray nozzle: 6-10, video monitoring: monitor the spraying situation and environment, generator set: 8KW.
[Function]: This type of vehicle also has the function of a water truck . The spray rod and lifting rod are electrically lifted and rotated during spraying operation; instead of the hydraulic system, the operation is simple, economical and convenient, and the coal is sprayed by curing agent and dust suppressant A kind of hard crust is formed on the surface, covering the coal under the hard crust, and it is not easy to be blown away by the wind and raised by coal dust during transportation.
The spray system is equipped with a single-vehicle flow meter (used to measure the amount of dust suppressant sprayed on each train skin.), and the spray system is equipped with a hook stop spray system (contact induction spray, stop spraying between two train skins) ), with vehicle number recognition and recording functions. The vehicle sprinkler system, bicycle flow meter and vehicle number recognition and recording functions are all connected and reflected on the smart computer screen.
When the spraying principle is in standby state. The spray arm is located above the maintenance and recovery platform parallel to the rails; in the working state, after the locomotive with a bow has passed. The spraying arm rotates to a position perpendicular to the truck riage, while adjusting the height, down to 30cm above the train truck riage. The vehicle identification system detects the truck number of the vehicle type. Under the control of the PLC, the spraying drum starts spraying according to the principle of stopping spraying on the hook. Operation: After the spraying is completed, the system is switched to the cleaning state, the pipes and nozzles are cleaned, and the cleaning liquid is returned to the mixing tank. When the vehicle speed is in the range of 05-1.0km/h, the spraying control system can achieve uniform coverage of coal transportation vehicles and ensure that the safety and normal operation of rolling stock are not affected.
Dongfeng Tianjin Railway dust suppression truck
Dongfeng Tianjin Railway dust suppression truck
Dongfeng Tianjin Railway dust suppression truck
Vehicle technical parameters | |||
Vehicle name: | CLW5164TDYD5 Multifunctional Dust Suppression Truck | Volume: | 8.5~10 CBM |
Total mass | 15800(Kg) | Dimensions | 9350,9000,8700×2500×3850(mm) |
Rated contained mass | 6325(Kg) | Cargo compartment size | 2800×2380×1850(mm) |
Curb quality | 9280(Kg) | Front passenger: | 3 (people) |
Fuel type: | Diesel oil | Emission Standards: | GB3847-2005, GB17691-2005 Euro V |
Approach / departure angle: | 20/13(°) | Front suspension/rear suspension: | 1430/2920,1430/2570(mm) |
Number of axes: | 2 | Wheelbase: | 3800, 4200, 4500, 4700, 5000, 3950, 5600 (mm) |
Number of tires: | 6 | Tire specifications: | 9.00R20 16PR,10.00R20 16PR,275/80R22.5 |
Front track (mm): | 1880,1900,1920 | Rear track (mm): | 1800, 1860, 1820 |
Axle load: | 5600/10200 | Maximum speed: | 98(km/h) |
other | The transport medium is: dust suppressant, density: 780 kg/m3. Effective tank volume: 8.5 m3, vehicle length (mm) / wheelbase (mm) / tank body dimensions (length × width × height) ( mm) Correspondence: 9350/5000/3100×2380×1670, 9000/4700/2800×2380×1850. Protective material: Q235A truck bon steel, connection method: the left and right sides and the rear lower part of the protection are all welded, the rear protection section size (mm): 120×50, the rear protection ground height (mm): 490. Optional cab with chassis, ABS model: 3631010-C2000, 4460046440; Manufacturer: East Koknorr Commercial Vehicle Braking System (Shiyan) Co., Ltd., WABCO Automotive Control System (China) Co., Ltd. Added different shape pictures and dust suppression fog cannon shapes. |
Chassis DFL1160BX1V technical parameters | |||
Chassis model | DFL1160BX1V | Chassis enterprise: | Dongfeng Commercial Vehicle Co., Ltd. |
Number of tires | 6 | Number of springs: | 7/9+6, 8/10+8, 10/11+10 |
Tire specifications: | 9.00R20 16PR,10.00R20 16PR,275/80R22.5 | Steering Type: | steering wheel |
Front track: | 1880,1900,1920 | Rear wheelbase: | 1800, 1860, 1820 |
Chassis emission standards: | GB3847-2005, GB17691-2005 Euro V | ||
Fuel type: | Diesel oil | batch: | 311 |
engine model | Engine manufacturer | Displacement (ml) | Power (kw) |
ISD210 50 ISD1900 ISD180 50 EQH180-52 EQH180-53 ISB180 50 ISD270 50 ISB210 50 ISB190 50 |
Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Commercial Vehicle Co., Ltd. Dongfeng Commercial Vehicle Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. | 6700 6700 4500 4752 4752 5900 6700 5900 5900 |
155 144 132 132 132 132 198 155 140 |


