Dongfeng Tianjin KR 6×2 bulk feed truck


Introduction: The price of Dongfeng Tianjin small three-axle bulk feed truck is ¥320,000, 30-36 cubic meters of bulk feed truck, which can be installed in installments and free of handling fees.

Dongfeng Tianjin KR 6×2 bulk feed truck

Dongfeng Tianjin KR 6×2 bulk feed truck

Vehicle configuration Dongfeng Tianjin KR 6x2 bulk feed truck

1. Vehicle model: CLW5253ZSLD6 Chassis model: DFH1250EX, Longqing 260 hp / Longqing 300 hp, power: 190KW/220KW euro VI emission engine, 1995+3500/1995+5000 wheelbase, original ABS, power assist, central control Locks, electric doors and windows, 7.5L displacement, 9 gears, 5.5T front axle, 10T rear axle, aluminum 400L fuel tank, 295/80R22.5 tires. The speed ratio is 3.07.

2. Top-loading configuration: the tank body is made of high-quality carbon steel plate, the whole vehicle has 3 augers, driven by 3 5.5KW motors, the top auger is hydraulically controlled to lift, and can rotate 180° left and right, and the tank can be made according to user requirements. There are independent sub-silo, which can independently control the unloading sequence and speed of each sub-silo. The unloading pipe is inclined at 60 degrees, the vertical unloading height is 8.5 meters, and it takes 35 minutes for the whole vehicle to be unloaded.

3. Paint process: sandblasting treatment, special anti-corrosion paint, acrylic acid iron red anti-rust + two-component acrylic acid ash middle coating + acrylic acid jade white topcoat, three cleans and three oils, acid resistance and oxidation resistance

Working principle of Dongfeng Tianjin KR 6x2 bulk feed truck

1. Feed factory loading: each bin is an independent bin and can be loaded with different types of feed;

2. Transportation: the warehouse cover and valve are closed and the auger is returned to its original position;

3. Unloading: the discharge auger is aligned, the lifting auger works, and the horizontal auger works, and the unloading sequence and unloading speed of each bin can be individually controlled;

4. Farm: adjust the discharge auger according to the position of the storage tank to connect with it.

vehicle advantage Dongfeng Tianjin KR 6x2 bulk feed truck

1. Standard with remote control function for 20 square and above

2. Hydraulic tank with cooling function

The electric auger is a new product newly developed for different customer groups and meets the low-end market. The car is not equipped with an on-board generator. The electric auger uses three-phase 380V mains power to supply power, and the wheel spacing is small and can be adapted to rural roads. The car is very cost-effective and is very popular with customers. It is suitable for small farms and feed factories with narrow road conditions. The mechanical screw unloading method is adopted, the unloading speed is fast, the continuous operation can be performed, and the production efficiency is greatly improved. Each component has a simple structure, convenient and flexible operation, and easy maintenance.

Dongfeng Tianjin KR 6×2 bulk feed truckDongfeng Tianjin KR 6×2 bulk feed truck


1. Suitable for feed processing plants, farms, short-distance transportation

2. The conveying method and equipment, please choose according to the actual place

3. Production cycle: 15 working days

Dongfeng Tianjin KR 6x2 bulk feed truck

Contact customer service for reserve price: +86 18872992009 (same number on WeChat)

This article was originally published by "Special Vehicle Network", please indicate the source for reprinting! All models are directly sold by the factory, there is no middleman to make the difference, so that you can buy a car with confidence, use the car comfortably, big brand, trustworthy!

Welcome to Chengli Special Automobile Co.,Ltd, pls contact us via:


Anonymous Write