Parameter configuration table and picture display of Dongfeng Tianjin flatbed one-to-two wrecker
Dongfeng Tianjin flatbed one-to-two wrecker truck adopts Dongfeng company chassis,Flat-head half-cab,The mounting plate is made of a 5mm 3P2A stamping plate of Wuhan Iron and Steel, and the plate length is 6.3 meters. It is suitable for the rescue of medium-sized trucks and 7-seater family truck s. It is an obstacle-rescue tool for auto repair shops, 4S shops, and road traffic rescue departments.
Dongfeng Tianjin TabletOne for two wreckers Chassis configuration
4×2 drive, D530 flat-head one-row semi-flat roof cab, Cummins ISDe180 40 Euro four engine, wheelbase 4700mm, all-steel 160L fuel tank, Dongfeng 6-speed DF6S750 transmission, first gear ratio 7.455, the highest gear is overdrive, 4.5T front axle, 9T rear axle, 9.00-20 bias tires.
Dongfeng Tianjin flatbed one-to-two wrecker special performance
The length of the flatbed of the truck is 6.3 meters, the width is 2.4 meters, and the maximum load-bearing mass of the flatbed is 5 tons. The truck is made of the Euro standard 5mm thick truck bon steel checkered plate, and the flat plate is divided into blocks by die stamping embossed plate. In the area where the tire is loaded, the anti-skid granular substance is sprayed, and the friction coefficient is increased, which is approximately larger than that of the general flat plate. 2 to 3 times the frictional adhesion also increases the non-slip function of the platform loading surface, which is beautiful and practical. The platform assembly is made of the latest one-time press molding, and 12 reinforced channel steel beams are fixed, which not only reduces the weight of the whole vehicle, but also increases the lifting and loading capacity.
Dongfeng Tianjin flatbed one-to-two wrecker special components and spare partsThe whole vehicle consists of loading platform assembly, 5P2 integral stamping flatbed, sub-frame assembly, trailing arm assembly, operating mechanism assembly on both sides, hydraulic system, The electrical system consists of 3 rear working lights and 1 4 ton hydraulic winch (20 meters steel wire rope).
The truck is equipped with: 1 tool box, 1 hand wash box, equipped with two trolleys (auxiliary wheels), 4 binding belts, a pair of L-shaped tire holders, a pair of forks, a pair of fork seats, and a chain hook.
Dongfeng Tianjin flatbed one-to-two wreckers are issued with chassis certificate, vehicle certificate, Euro unified motor vehicle invoice, vehicle-mounted tools, vehicle warranty manual, Euro service station directory, etc.