China Trucks maker and designer

Bulk feed truck

» Van Box Truck » Bulk feed truck

Dongfeng Tianjin 10-ton EuroFourth Bulk Feed Transporter

Parameter configuration table and picture display of Dongfeng Tianjin 10-ton Guosi bulk feed truck


Chassis configuration: original Dongfeng Tianjin chassis, Tianjin flat head with sleeping cab, Cummins 180 horsepower engine, Euro IV emission standard, Dongfeng 6-speed gearbox, 9 tons rear axle, double-layer girder, 9.00 nylon tires, 5000mm wheelbase, With original air conditioner.
Special configuration: standard tank made of truck bon steel, effective volume 20 cbm , can hold 12 tons, electric screw auger unloading, electric screw auger connected to three-phase 380V for power supply, discharge pipe incline 60 degrees, vertical discharge height 8.6 meters, It takes 20 minutes for the whole vehicle to be unloaded. The standard configuration is divided into 3 independent compartments; three-phase 380V electric screw auger is used for unloading, and the unloading speed is 1 cubic meter or more than 0.6 tons per minute; it fully meets the filling needs of the feed tower of the breeding base.

Corporate trademark Cheng Liwei product name   Tianjin 10 tons feed truck    
Vehicle model CLW5161ZSLD4 Chassis model DFL1160BX5 Emission Standards (Euro IV) Diesel
engine model Cummins ISB180 40 Engine power 132KW180 horsepower   Total mass (KG)   16000
Tire specifications 9.00-20,9.00R20, Gearbox Dongfeng 6th gear   Rated mass (KG) 7800
  Wheelbase (mm)   5000 Number of tires 6 Curb weight (KG) 8005

Vehicle size (mm)

9000*2450*3800 Maximum speed 90 Announcement date 20131018
Tank volume 20 cubic Unloading speed  500-600 kg/min
Vehicle unloading time 20 minutes Maximum elevation angle of discharge 70 degrees
Horizontal conveying distance 6.5 meters Unloading rotation angle 360 degree rotation
Vertical conveying distance 8.5 meters Tank compartment

The standard configuration is divided into three warehouses, and 3 different feeds can be loaded at the same time


Vehicle name: Bulk feed truck Vehicle category: VIP Car
Chinese Brand: Cheng Liwei English Brand:
Announcement batch: 253 Exemption: no
engine Engine manufacturer Displacement (ml) Power (kw)
ISDe210 40
ISDe180 40
ISDe185 40
ISB180 40
Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Motor Co., Ltd. Dongfeng Cummins Engine Co., Ltd. 6700
Engine trademark: Fuel type: Diesel (mm)
Dimensions: 9000×2450×3800(mm) Cargo compartment size: ××(mm)
Total mass: 16000(Kg) Loading quality: 0
Quality of preparation: 8005(Kg) Rated quality: 7800(Kg)
Trailer quality: (kg) Semi-trailer saddle:
Rated passenger: (people) The number of passengers in the cab: (people)
Approach / departure angle: 20/12(°) Front suspension/rear suspension: 1430/2570(mm)
Axle load: 6000/10000 Wheelbase: 5000,4700,4500(mm)
Number of axes: 2 Maximum speed: 90(km/h)
Fuel consumption: 29.5 Number of springs: 8/10+8,7/9+6
Number of tires: 6 Tire specifications: 10.00-20,10.00R20,9.00-20,9.00R20,275/80R22.5 16PR
Front track: 1880 Rear track: 1860,1800
Before braking: After braking:
Before making exercises: After the exercise:
Steering Type: steering wheel Starting method:
Chassis emission standards: GB3847-2005, GB17691-2005 (Euro IV)
Transmission type: According to the standard:
Vin vehicle identification code: LGAX2B13×××××××××
Logo company: Changzhou Huarisheng Reflective Material Co., Ltd., Changzhou Huawei Reflective Material Co., Ltd. Release date: 20131018
Vehicle remarks: Tank dimensions: 6050×2400×1900 (mm); tank effective volume: 16.3 cubic meters; medium: extruded and pelleted feed, powder; density: 500 kg/cubic meter; the truck only uses 5000mm wheelbase. The material of the protection device is Q235A, and the connection method: side protection bolt connection, rear protection welding connection. The rear protective device has a height of 490mm from the ground, and a cross-sectional dimension of width × height of 50mm × 100mm. The truck is equipped with a driving recorder with satellite positioning function.



The electric auger-type bulk feed truck is a new product newly developed for different customer groups to meet the low-end market. The electric auger is connected to a three-phase 380V for power supply. The truck is highly cost-effective and is favored by customers. It adopts a mechanical screw unloading method, which has a fast unloading speed and continuous operation, which greatly improves production efficiency.

Optional 1: The original truck engine generates electricity, (easy to use, no external power supply required)

Optional : remote control system, complete individual operation independently.

Examples of unloading feed trucks:
Warm reminder: 1. The density of various feeds is different, and the loading and unloading tonnage is different. The total volume of the tank is 20 cubic meters, and the feed density is: 0.55, 0.6, 0.7, and the loading capacity is: 11T, 12T, 14T.

2. Using Tianjin chassis, suitable for long-distance transportation, large-scale feed factory.

3. The speed of different feed conveying methods is different, please choose according to the actual place. Electric or hydraulic.

4. Production date: 10 working days.

Complete vehicle procedures: complete vehicle qualification certificate, chassis qualification certificate, vehicle registration invoice, vehicle-mounted tools, vehicle quality assurance manual, Euro service station directory, etc.
Bulk feed truck , , , ,

Enquiry Form ( we will get back you as soon as possible )


4 + 5 = ?

Maybe you like also

  • Categories

  • Open chat
    Whatsapp Talk Now!