Dongfeng Special Commercial 8 tons of stone coal truck-mounted sling climbing ladder

Comments

Real shot pictures of Dongfeng Special Commercial's 8-ton stone coal truck-mounted sling climbing ladder

Dongfeng Special Commercial 8 tons of stone coal truck-mounted sling and ladder configuration

Chassis configuration:
Dongfeng Special Traders’ 8 tons of stone coal truck-mounted sling climbing ladders, using Dongfeng Special Trade’s chassis, Yuchai’s 180-horsepower engine, EuroV emission (15 years of obsolescence), Shaanxi Gear 8-speed gearbox, 10.00R20 steel wire tires, 300mm local three-layer Girder, front axle Dana reinforced bridge 5.5 tons, rear axle Dana reinforced bridge 11.5 tons, with ABS, lower protection, power take-off, Tianlong instrument panel, electric doors and windows, air brake, exhaust brake, new regulations in 2018 Configuration.

Crane parameters:

Stone coal 8-ton four-section straight-arm crane, full hydraulic full swing, high-altitude seat operation, maximum lifting height of 13.8 meters, working radius of 12.3 meters, and maximum lifting capacity of 1.2 tons. The boom extends 8 meters, the working radius is 6.2 meters, and the lifting capacity is 6.5 tons. The boom extends 10 meters, the working radius is 8.3 meters, and the lifting capacity is 5.2 tons. The boom extends 13 meters, the working radius is 11.2 meters, and the lifting capacity is 3 tons. The manufacturer reminds users to strictly follow the pointer nameplate during operation.
Vehicle parameters:
 
Vehicle model: EQ5168JSQLV1
 
Chassis model: EQ1168GLJ4
 
Truck Size: yellow truck d
 
Vehicle size: 9000×2500×3850mm
 
Cargo box size: 5600×2300×550
 
Chassis brand: Dongfeng Special Commercial Single Axle Chassis
 
Crane brand: Stone coal 8 tons four-section telescopic boom crane
 
Cargo box length: 5.6
 
Engine: Yuchai 180 horsepower
 
Transmission: Fast 8-speed
 
Emission standard: EuroV emission, environmental protection, complete fuel
 
Wheelbase: 5150mm
 
Optional configuration: optional thickening of the box plate, optional XCMG, Sany, Furukawa cranes
 
Total weight: 15800kg
 
Curb weight: 11380kg
 
Registered tonnage: 4290kg
 
Model advantage: a ladder at the end of the truck go box, which can load and unload the excavator
 
The truck-mounted crane manufacturer makes the whole vehicle strictly in accordance with the requirements of the announcement, does not exceed the size, has a fuel announcement, an environmental protection announcement, and the EuroV emission standard, and is listed on a Euro scale. At the same time, our company can also arrange professionals to assist users in listing, please rest assured to buy.

Welcome to Chengli Special Automobile Co.,Ltd, any questions contact us via: sales@chengli.co
匿名

Comment

Anonymous Write