China Trucks maker and designer
Mail: sales@cl-spv.com
EnglishالعربيةবাংলাFrançaisDeutschItalianoPortuguêsРусскийEspañolاردو

Truck Mounted Crane

» Construction Truck » Truck Mounted Crane

Dongfeng small three-axis SANY 10-ton truck-mounted crane

Real shot pictures of Dongfeng small three-axis SANY 10-ton truck crane

Dongfeng small three-axis SANY 10-ton truck-mounted crane configuration

Chassis configuration:
It adopts D913 luxury cab, Yuchai 220 horsepower engine, Fast Shaantooth large eight-speed gearbox, 11.00R20 steel wire tires (including spare tires, 9 pieces in total), 300mm partial straight-through three-layer beams, double front axle Dana Reinforced bridge 5.5 tons + 5.5 tons, double rear axle Dana reinforced bridge 11.5 tons, with Dongfeng original ABS, lower protection, power take-off, imitation Dongfeng Tianlong dashboard, electric doors and windows, air brake, exhaust brake. It is equipped with a three-to-one 10-ton four-section straight-arm crane, high-altitude seat operation mode, and the length of the cargo box is 8.5 meters. The vehicles comply with the EuroV emission standards, are not overweight or oversize, and are listed on a Euro scale.

Crane parameters:
Sany crane, one of the best crane brands in China, is favored by users. Three-one 10-ton four-section straight-arm crane, model SPS25000, can rotate 360 degrees, high-altitude seat operation, with remote throttle, maximum lifting height of 16.3 meters, maximum working radius of 14.8 meters, and maximum lifting capacity of 1.6 tons. Sany Group’s after-sales guarantee is guaranteed for one year or 30,000 kilometers, the crane brand with the lowest failure rate.
Vehicle parameters:
Vehicle name: Dongfeng small three-axle SANY 10-ton truck-mounted crane
 
Vehicle model: EQ5250JSQGZ5D1
 
Chassis model: EQ1250GZ5DJ
 
Card type: yellow card
 
Vehicle size: 12000×2500×3800mm
 
Cargo box size: 8500×2300×550mm
 
Chassis brand: Dongfeng special bottom small three-axis (6×2) chassis
 
Crane brand: Three-one 10-ton four-section straight-arm crane (high-altitude operation)
 
Cargo box length: 8.5 meters
 
Engine: Yuchai 220 power
 
Gearbox: Shaanxi Gear Large 8-speed gearbox
 
Emission standard: EuroV emission, environmental protection, complete fuel
 
Wheelbase: 2150+5150mm
 
Optional configuration: hoist can be installed under operation, optional SANY original factory rear outrigger
 
Total weight: 25000kg
 
Curb weight: 14800kg
 
Registered tonnage: 10070kg
 
Model advantage: high-end models in the Dongfeng 10-ton truck-mounted crane series
 
The truck-mounted crane manufacturer makes the whole vehicle strictly in accordance with the requirements of the announcement, does not exceed the size, has a fuel announcement, an environmental protection announcement, and the EuroV emission standard, and is listed on a Euro scale. At the same time, our company can also arrange professionals to assist users in listing, please rest assured to buy.
Keywords:
Truck Mounted Crane

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Phone:
*
Messenger:
*
Message:

Verification:
5 + 4 = ?

Maybe you like also

  • Categories