Dongfeng Ruiling sewage treatment vehicle parameter configuration table and picture display

The Dongfeng Ruiling sewage treatment vehicle is 5.99 meters long, 1.99 meters wide, and 2.65 meters high. The vehicle can be driven with a small plate and a C-photograph. There is an exemption announcement. The truck can directly self-suction the sewage from the septic tank into the separation compartment for compression and separation, and then discharge the liquid into the municipal pipe network. After the solid is compressed, it can be packaged and transported. It can be pumped and discharged immediately, working continuously, no matter how large the scale is. The manure tank can be completed in one operation, without the need for transportation back and forth.
The sewage treatment vehicle adopts the Dongfeng chassis, the chassis configuration is: 3.3 meters wheelbase, 7.00-10 nylon tires, 3 tons rear axle, 1.5 tons front axle, 5-speed gearbox and steam brake. The length of the vehicle is 5.995 meters, the width is 1.99 meters, and the height is 2.65 meters. The exterior of the sewage treatment truck is designed with 6 roll-up doors and 4 garbage compartments. The rear adopts double doors and LED advertising billboards for easy operation and publicity.
The sewage treatment truck has a generous and beautiful appearance. The standard equipment has a working capacity of about 80 cubic meters meters per hour, a suction height of about 8 meters, and a self-priming part of pipe length up to 20 meters or more. It can work continuously for 4 hours. It can be completely exposed to the air for more than one minute, and it has better handling capacity for relatively viscous dirt.
Conventional configuration of sewage treatment truck: There are 4 sewage suction pipes of 80, each 7 meters long, totaling 28 meters, with a roll of 100 meters electric wire, the actual length is 95 meters, of which 5 meters are used from the power distribution box to the motor And the wire winch, the remaining 90 meters are used to connect the external power supply.
Electricity for sewage treatment vehicles has dual functions, that is, if there is no external power supply, the vehicle's own host can be used for operation; if there is an external three-phase power supply, the configured wire can be used to connect the motor for operation. As long as there is a power supply, it is best to use an external power supply to operate with a motor, because electricity is definitely cheaper than using a diesel engine, and the wear of the motor is much smaller than that of a diesel engine. This allows customers to save most of the money. This is also one of the sewage treatment vehicles. Big advantages can be mentioned during promotion.
Dongfeng Xiaodolika sewage treatment truck can be small -labeled, which is very practical for sewage treatment in septic tanks, municipal pipelines and sewage treatment plants in first- and second-tier cities.
Basic configuration of sewage treatment truck
【The main technical parameters】 | |||
Product trademark | Cheng Liwei | Announcement batch | 259 |
product name | Sewage treatment vehicle | Product number | CLW5040TWC4 sewage treatment truck |
Total mass (Kg) | 4495 | The number of passengers in the cab (person) | 2,3 |
Rated load quality (Kg) | Dimensions (mm) | 5995×1990×2650 | |
Curb weight (Kg) | 4365,4300 | Cargo compartment size (mm) | ×× |
Approach angle/departure angle (°) | 19/12 | Front suspension/rear suspension (mm) | 1032/1663 |
Number of axes | 2 | Wheelbase (mm) | 3300 |
Axle load (Kg) | 1800/2695 | Maximum speed (Km/h) | 95 |
other | The truck is equipped with an optional cab with the chassis. The working principle of the sewage treatment vehicle: the sewage is pumped into the sewage separator through the sewage pump, and the water is separated from the impurities in the sewage separator, and finally the water without impurities is discharged. Protective material: Q235A truck bon steel, connection method: the left and right side and rear lower protective devices are equipped with skirts, and the skirts and the truck body are integrally welded, and the rear skirts are spaced from the ground (mm): 340. | ||
【Chassis technical parameters】 | |||
Chassis model | DFA1041SJ35D6 | Chassis name | Truck chassis |
Brand name | Dongfeng | manufacturer | Dongfeng Motor Co., Ltd. |
Dimensions (mm) | 5845×1900, 1950×2220 | Number of tires | 6 |
Approach angle/departure angle (°) | 19/16 | Tire specifications | 7.00-16 8PR, 7.00R16 8PR, 6.50-16 10PR, 6.50R16 10PR |
Number of leaf spring | 8/9+5, 6/8+4, 6/6+5 | Front track (mm) | 1506,1404,1500,1586 |
Fuel type | Diesel oil | Rear track (mm) | 1466,1458,1520,1530 |
Emission Standards | GB3847-2005, GB17691-2005 Euro IV | ||
engine model | Engine manufacturer | Displacement (ml) | Power (Kw) |
4B28BTCI SD4BW754U YN33CRD2 CY4102-CE4F YC4FA90-40 D28D10-4DA CY4T75-CE4 4F20ATCI 4DW93-84E4 YN27CRD1 |
Changchai Co., Ltd. Jiangsu Sida Power Machinery Group Co., Ltd. Kunming Yunnei Power Co., Ltd. Dongfeng Chaoyang Chaochai Power Co., Ltd. Guangxi Yuchai Machinery Co., Ltd. Dongfeng Light Engine Co., Ltd. Company FAW FAWAutomobile Co., Ltd. Wuxi Diesel Engine Factory Kunming Yunnei Power Co., Ltd. | 2834 2545 3298 3856 2982 2771 3707 1995 2540 2672 |
70 75 75 73 66 75 75 60 64 70 |
The sewage treatment truck has a beautiful appearance, the working capacity can reach 70-80 cubic meters meters per hour, the sewage suction height is 7-9 meters, and the self-suction pipe length can be less than 20 meters. It can work continuously for 2-4 hours. For thicker dirt It also has better self-priming ability.
