Dongfeng K5 truck mounted crane with rear ladder

Comments

Dongfeng K5 truck mounted crane with rear ladder

Guide: Dongfeng K5 rear eight-wheel Chengli 12-ton truck-mounted flatbed ladder trailer can load and unload 150 excavators. The length of the flatbed is 8.2 meters, and the length of the crane arm is 17.7 meters. 108,000 yuan to pick up the car and go home.

Dongfeng K5 truck mounted crane with rear ladder

Dongfeng K5 truck mounted crane with rear ladder

Dongfeng K5 truck mounted crane with rear ladder

Chassis configuration Dongfeng K5 truck mounted crane with rear ladder

Dongfeng K5 row semi-cab, Yuchai 270 hp engine, Shaanxi Gear 9JS119T gearbox with synchronizer and power take-off, 300mm straight-through three-layer special frame, 5T/10T front and rear Dongfeng Dana bridges, 11.00R20 steel wire tires , with air conditioning, airbag seats, multimedia MP5, driving recorder, multi-function steering wheel.

Crane parameters: Chengli Weili 8-ton four-section boom crane, double pump system, operation on a high-altitude seat, the crane can rotate 360 degrees, the crane working height is 17 meters, the maximum working radius is 15 meters, and it is equipped with a single-chamber hydraulic The rear outriggers improve the safety of the operation, and the crane is guaranteed for one year free of charge.

Crane parameters: Chengli Changwei 12-ton five-section straight arm crane, lifting height of 20.1 meters, working radius of 17.7 meters, upper operation, full rotation, full hydraulic pressure, double pump, radiator, automatic hook retraction with ladder optional : Single-chamber rear outrigger, double-chamber rear outrigger, and auxiliary beam;

Can be installed: single/double hanging basket, remote control, drill pipe, brick clamp, wood grabber;

The crane can be equipped with Changwei 12-14 ton five-section straight arm crane, and Xinfeigong 12-14 ton four-section straight arm crane.

Specifications of the carriage of Dongfeng K5 truck mounted crane with rear ladder

The length of the carriage plate is 8.2 meters and the width is 2.4 meters. The columns of the column can be dismantled. The plate adopts a 5mm thick anti-skid patterned bottom plate, and the beam is 120×120×8mm square tube. The beam spacing is 25 cm. The ladder is made of I-beam. Manual Operation, the ladder is 2.5 meters long and 80 cm wide. Ladder optional, hydraulic power.

 

Contact customer service to inquire about the reserve price: +86 18872992009 (same number on WeChat)

This article was originally published by "Special Vehicle Network", please indicate the source for reprinting! All models are directly sold by the factory, there is no middleman to make the difference, so that you can buy a car with confidence, use the car comfortably, big brand, trustworthy!

Welcome to Chengli Special Automobile Co.,Ltd, pls contact us via: sales@chenglico.com
匿名

Comment

Anonymous Write