China Trucks maker and designer
Mail: sales@runtrucks.cn
EnglishالعربيةবাংলাFrançaisDeutschItalianoPortuguêsРусскийEspañolاردو

City Sanitation Truck

» City Sanitation Truck

Dongfeng D9 high pressure cleaning truck

Also known as high pressure cleaning vehicles drain vehicles, strong pressure generated by the impulse to open the high pressure water pipe is blocked.The main part of the tank, high pressure pump, hydraulic systems.High pressure cleaning vehicles mainly used for cleaning the city sewer, pipeline sediment, dead mud ditch dredge, can also be used to clean industrial drain pipes, wall, etc., clean roads, cbms ground.High pressure cleaning vehicles can also be fitted sprinklers, sprinkler installation green gun, pediment, sprinkle, cbm spray, may be green watering, spraying, pressure dust, high pressure washing road surface, can be used for emergency fire, according to user needs can be converted into a high pressure cleaning suction sewage truck joint function to clear the truck, a multi-purpose vehicles, affordable.
High-pressure truck washing principle is to have by rotating the bending of the elastic wire transferred into sewer pipe blockage, the blockage to the cloth, with things like hair out.Another tool is called through a gun, a pneumatic tool to clear, with the principle of high pressure impulse to open clogged sewer.Life common skin kick child is such a principle flung open clogged pipes.Industrial pipeline dredge pipeline due to differences in the size of the pipe with drain cleaners relatively large, 100MM or less the same pipeline dredge sewer with family.With a high pressure water pump water tankers, city sewer cleaning sediment, dredge sewer.Can also be used for cleaning industrial pipe discharge, wall surface, and serves as sprinklers, and rinse water transport highway, it can be used for emergency fire fighting.High pressure cleaning vehicles are to be based on two types to the original chassis fitted together, part of the tank tops, work arranged high pressure pump, high pressure pump Model: 3DS-8/16, GYB-8/16, pressure: 16-19Mpa flow rate: 8m3 / h, hose length: 60m, the roller tube force: 1800 N, hose diameter: φ19 mm, joint type: 0, volume control speed: 0-25m / min, clamp aperture angle: 15 °, 25 ° advance force: ≥180 N.

Dongfeng D9 high pressure cleaning truck

A full range of vehicle Pictures:
东风大多利卡高压清洗车

东风大多利卡高压清洗车1

东风大多利卡高压清洗车3

东风大多利卡高压清洗车4
Dongfeng D9 high pressure cleaning truck

Requirements for water

When using high pressure cleaning vehicles rivers, ponds as a water source, all attention suction pipe end portion submerged.In order to avoid inhalation of stones or more sediment, floating debris, suction pipe end portion is generally provided with a filter means, the filter means is removed during non-absorbent.If the water is shallow, it is necessary to advance at deepened some of the water-absorbing, and to ensure that debris does not contain the air into.

Before cleaning, the surface temperature of the body to be cooled to below 60 ℃, ambient temperature is maintained at 0 ~ 40 ℃.Body paint from the gun 15 cm or more.Flushing sequence to both cbms from the roof.When flushing the grid portion of the front of the truck, should use water mist, not facing the heat sink tank with flushing water column or a condenser, mounted fender plastic arches, cleaning should be removed, and thoroughly wash the fender , the inner fender.

1.Is the coercive remove residual traces of the vehicle body can be used with the all-round cleaning water to scrub clean cotton truckefully, then wrung free cotton cloth dampened with a washing liquid, dry paint on the vehicle body along a direction perpendicular to the trucks the washing liquid, and finally washing with sufficient water to completely rinse liquid, and in a timely manner with a synthetic sheepskin towel dry moisture.Dry the entire vehicle to reach the water mark, no stain glass

2.High-pressure water cleaning, high pressure water jets is from top to bottom in the contaminated sediment will wash away the body surface, followed by washing the rear, lower portion of the last washing.This step should be noted that the comprehensive chassis rinsed thoroughly cleaning edge portion, a curved portion, fenders and other parts.In particular should the wheel and brake disk portion, and a front fender portion grid truck parts, truck door frame and around skirt sediment, dirt rinse thoroughly.

3.Is wiping, dipping a sponge shampoo wash with washing liquid, again wiping the body, if not easy to remove the contaminants, can be repeated wiping, wiping sponges attention to the use of separate upper and lower body, a lower body in order to avoid scratching the body paint sand.Spray rinse followed by a high pressure, in particular truck To seams, like the corner of a foam residue rinse.

Please contact us for more detailed configuration Sales Manager!!!

Dongfeng D9 high pressure cleaning truck
Keywords:
City Sanitation Truck, High Pressure Jetting , ,

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Message:

Verification:
0 + 9 = ?

Maybe you like also

  • Categories