Parameter configuration table and picture display of Dongfeng 153 bulk feed truck (10 tons)
The Dongfeng 153 bulk feed truck has a wide chassis and 8-speed boxes. It is very suitable for mountain climbing. It is the first choice for feed factories and farms with poor road conditions. This bulk feed truck uses the original Dongfeng chassis, which is authentic to the Euro four emission standards. , Cummins 190 horsepower engine, great power and good quality.
The feed tank of the bulk feed truck is erected on the chassis of the truck, and the top of the tank has an inlet opening. A screw conveyor unloading pipe (commonly known as unloading auger) at the top can rotate and lift freely, with an elevation angle of up to 60 degree. During transportation, the top spiral tube lies on the top of the tank;When feeding, lift up so that the discharge port at the end of the pipe is connected with the feed door on the top of the storage tank of the livestock and poultry farm. There is a control device in the cab (the control device can also be installed at the end of the tank), and pass through when unloading. The power output shaft and reducer under the vehicle drive the screw to complete the unloading.
| Product main technical parameters | |||
| product name: | CLW5160ZSLT4 bulk feed transporter | Dimensions: | 9000, 8700, 8400, 7850X2480X3700(mm) |
| Chassis model: | EQ1164GKJ | Cargo compartment size: | XX (mm) |
| Total mass: | 15990(Kg) | Approach/departure angle: | 30/20,30/18(°) |
| Rated quality: | 6895,6960(Kg) | Front suspension and rear suspension: | 1250/2650,1250/2750(mm) |
| Quality of preparation: | 8900(Kg) | Maximum speed: | 90(km/h) |
| Vehicle remarks: | Optional cab front panel, air intake grille, front bumper and front lights. Protective material: Q235A truck bon steel, connection method: welding connection on the left and right sides, bolt connection for the rear lower protection, rear lower protection width x height (mm) 50x230, rear protection ground clearance (mm): 540, only 5100 , 4700, 4500, 3950 wheelbase, long/wheelbase/rear overhang corresponding relationship is: 9000/5100/2650; 8700/4700/2750; 8400/4500/2650; 7850/3950/2650, the quality caused by different wheelbases Differences less than 3% can be ignored. YC6J180-42, YC6J200-42, ISDe180 40, ISDe210 40, ISB170 40, ISB190 40, ISB210 40, ISB3.9-160E40A correspond to fuel consumption values of 27.30, 27.04, 26.76, 27.29, 26.63, 27.91, 27.78, 26.49L/ 100km. The truck is equipped with a driving recorder with satellite positioning function. ABS model: 3631010-C2000, manufacturer: Dongfeng Electronic Technology Co., Ltd. Brake System Company. | ||
| Chassis parameters | |||
| Chassis model: | EQ1164GKJ | Fuel type: | Diesel oil |
| Number of axes: | 2 | Front track: | 1900,1810(mm) |
| Wheelbase: | 4800, 5100, 5600, 3800, 3950, 4200, 4500, 4700 | Rear track: | 1800,1700(mm) |
| Number of passengers in the cab: | 3,2 | Number of springs: | 8/10+7 |
| Number of tires: | 6 | Axle load: | 5995/9995 |
| Tire specifications: | 10.00-20 16PR,10.00R20 16PR,9.00-20,9.00R20 | ||
| Emission Standards: | GB3847-2005, GB17691-2005 Euro IV | ||
| Engine parameters | |||
| engine: | Engine manufacturer: | Displacement (ml): | Power (kw): |
| YC6J180-42 YC6J200-42 ISDe180 40 ISDe210 40 ISB210 40 ISB190 40 ISB170 40 ISB3.9-160E40A |
Guangxi Yuchai Machinery Co., Ltd. Guangxi Yuchai Machinery Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd. |
6500 6500 4500 6700 5900 5900 5900 3900 |
132 147 136 150 155 140 125 116 |
