Dongfeng 14m aerial operating truck

Comments
Excerpt
Dongfeng 14m high-altitude operating vehicle adopts folding crank arm structure, the operating arm is three-section folding, working bucket and turntable double working position, up and down operation, hydraulic manual control, 360-degree rotation, four hydraulic outriggers, with 1 ton hook , The maximum load-bearing capacity of the working bucket is 200 kg, steel tool box and hoarding, and anti-skid tread plate.

Parameter configuration table and picture display of Dongfeng 14m aerial work truck

Dongfeng 14m aerial operating truck

1. The basic parameters of the vehicle:  

Serial number

name

Model and specification

1

Vehicle brand

Chengliwei - aerial operating vehicle

2

Product number

CLW5060JGKD5

3

Chassis model

EQ1070DJ3BDF

4

Vehicle size

7400 ×2000×3100

5

Total mass

5775kg

6

Curb quality

5450kg

7

engine

To be determined

8

Wheelbase

3308mm

9

Maximum working height

14 meters

10

Main technical parameters of operation

The height of the platform from the ground≥12.3m

Maximum operating range of the platform≥6.46m

Operating range at the maximum operating height of the platform≥2.05m

Operating height when the platform's maximum operating range is ≥8.6m

Rated load of working bucket 200kg

Outrigger

Method: H-shaped outrigger

Quantity: 4

Control: Individually adjustable or linked.

Transverse span: 2680mm

Longitudinal cross play: 3000mm

Hook

The maximum lifting weight is ≤1000kg, and the safety value is 800kg.

Maximum lifting height 6.3m

Main operation

Operating position: double working position operation of turntable and hanging rail.

Control mode: manual hydraulic or electronic control operation.

11

Hoarding and platform board

Steel tool box and hoarding, pattern anti-skid platform

12

Boom structure

Three-section folding arm

13

Slewing device

Two-way 360 0 continuous rotation

14

Environmental protection / exemption

Yes/Yes

 

two,Aerial work truckIntroduction and performance characteristics:
1.Features:
Dongfeng Capit14The meter-high-altitude operating vehicle adopts a folding crank arm structure, and the operating arm is a three-section folding type.Working bucket and turntable have double working positions, up and down operation, hydraulic manual control, 360-degree rotation, four hydraulic outriggers, with 1 ton hook, the maximum load of the working bucket is 200 kg,Steel tool box and hoarding, pattern anti-skid platform.
The main components of the vehicle are equipped with two-way hydraulic lock, two-way lock balance valve, hydraulic flow valve, hydraulic cylinder and other domestic well-known brands, with stable reversing, flexible and convenient operation; outriggers and working arms are interlocked, safe and reliable, and prevent misoperation;HThe outriggers are designed with large span and good stability. The outriggers can be stretched independently and linked together. The rear outriggers are equipped with outrigger flashing lights, which are used to outline the outriggers and send out light alarm signals during operation.
2.product description:
1,  The working bucket adopts a mechanical self-balancing design, and its function is that the working bucket is always in a balanced state when working.

The maximum extension angle of the forearm is up to65° in order to adjust to the best working position. (The measurement method of forearm extension angle is different, some manufacturers mark it as90°)
2,  The upper and lower operating systems can perform various operations on the work bucket and the turntable.

3.  Night work lights, the operating table can be optionally equipped with operating lights according to the customer's working environment, making night work safer.

4.  The outriggers are individually adjustable, and each outrigger can be adjusted individually according to the working ground environment. Even if the ground is uneven, the whole vehicle can be adjusted to a stable state.

5.  The outrigger adopts front and backHType structure, the bearing surface is larger, and the stability is higher; it can prevent the truck beam from deforming or breaking (note: if the outrigger adopts the frontV,RearHType of truck , after long-term use, the truck beam is likely to be deformed or broken down due to the upside-down of the front.

6.  The four vertical outrigger cylinders and the upper arm, lower arm, and forearm cylinders are all equipped with two-way hydraulic locks, whose function is to lock the cylinders in place after reaching the required position to prevent accidents. A two-way balance valve is installed on the working arm to make the working arm run more smoothly.

Dongfeng 14m aerial operating truck

3. Details of onboard accessories:

1. A manual for a truck.  

2. One copy of the vehicle chassis certificate.  

3. A manual for aerial work trucks.  

4. Warranty for trucks.  

5. Truck-mounted tools.

Dongfeng 14m aerial operating truck

Welcome to Chengli Special Automobile Co.,Ltd, pls contact us via: sales@chenglico.com
匿名

Comment

Anonymous Write