China Trucks maker and designer
Mail: sales@runtrucks.cn
EnglishالعربيةবাংলাFrançaisDeutschItalianoPortuguêsРусскийEspañolاردو

Aerial Platform

» Special Purpose Truck » Aerial Platform

Dongfeng 145 aerial operating truck (20 meters)

Parameter configuration table and picture display of Dongfeng 145 aerial operating truck (20 meters)

Dongfeng 145 20 meters Aerial PlatformTruck

2. The basic parameters of the vehicle:

Serial number name Model and specification
1 Vehicle brand Chengliwei -Dongfeng 145 aerial operating truck
2 Product number CLW5101JGKE5
3 Chassis model EQ1160GD5DJ
4 Working height 20 meters
5 Main technical parameters of operation Platform height above the ground 18.3m

Maximum operating range of the platform ≥8.7m

Operating range at the maximum operating height of the platform≥3.07m

Operating height at the maximum operating range of the platform≥11.5m

Rated load of working bucket 200kg

Outrigger Method: H-shaped outrigger

Quantity: 4

Control: Individually adjustable or linked.

Horizontal span: 2930mm

Longitudinal cross play: 4500mm

Hook The maximum lifting weight is ≤1000kg, and the safety value is 800kg.

Maximum lifting height 8.5m

Main operation Operating position: double working position operation of turntable and hanging rail.

Control mode: manual hydraulic or electronic control operation.

6 Hoarding and platform board Steel tool box and hoarding, pattern anti-skid platform
7 Boom structure Three-section folding arm
8 Slewing device Two-way 3600 continuous rotation
9 engine According to the environmental protection announcement
10 Vehicle size 9300×2500×3800
11 Total mass 9995kg
12 Curb quality 9800kg
13 Wheelbase 4500/4700mm
14 Environmental protection / exemption Yes/Yes

3. Introduction and performance characteristics of aerial work trucks:

1. Function introduction:

Dongfeng 145 20-meter high-altitude operating vehicle adopts folding crank arm structure, the operating arm is three-section folding, working bucket and turntable double working position, up and down operation, hydraulic manual control, 360 degree rotation, four hydraulic outriggers, with 1 ton Hook, the maximum load-bearing capacity of the working bucket is 200 kg, steel tool box and hoarding, and anti-skid tread plate.

The main components of the vehicle are equipped with two-way hydraulic lock, two-way lock balance valve, hydraulic flow valve, hydraulic cylinder and other domestic well-known brands, with stable reversing, flexible and convenient operation; outriggers and working arms are interlocked, safe and reliable, and prevent misoperation; H-shaped outriggers have a large span and good stability. The outriggers can be independently retractable and linked. The rear outriggers are equipped with outrigger flashing lights, which are used to outline the outriggers and send out light alarm signals during operation.

Dongfeng 20 meters Aerial PlatformTruck

2. Product overview:

1. The working bucket adopts mechanical self-balancing design, its function is that the working bucket is always in a balanced state when working.

The maximum extension angle of the forearm is up to 65° for adjustment to the best working position. (The measurement method of forearm extension angle is different, some manufacturers mark it as 90°)

2. The upper and lower operating systems can complete various operations on the work bucket and the turntable.

3. Night work lights, operation lights can be installed on the console according to the customer’s operating environment, making night work safer.

4. The outriggers are individually adjustable, and each outrigger can be adjusted separately according to the working ground environment. Even if the ground is uneven, the whole vehicle can be adjusted to a stable state.

5. The outrigger adopts front and rear H-shaped structure, which has larger stress surface and higher stability; it can prevent the car beam from deforming or breaking (Note: If the outrigger adopts front V and rear H-shaped models, it will be used for a long time. After the front is upside down, it is easy to cause the car beam to deform or break).

6. The four vertical outrigger cylinders and the upper arm, lower arm, and forearm cylinders are all equipped with two-way hydraulic locks. The function is to lock the cylinders in place after reaching the required position to prevent accidents. A two-way balance valve is installed on the working arm to make the working arm run more smoothly.

4. Details of onboard accessories:

1. A manual for a truck.

2. A copy of the vehicle chassis certificate.

3. A manual for aerial work trucks.

4. Warranty for trucks.

5. Truck-mounted tools.

Dongfeng 145 Aerial PlatformTruck

Keywords:
Aerial Platform , , , , , ,

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Phone:
*
Messenger:
*
Message:

Verification:
2 + 5 = ?

Maybe you like also

  • Categories