20 cbm bulk feed truck

The 20-square bulk feed transport vehicle is mainly used by feed factories to transport finished bulk feed products or feed production materials to livestock and poultry farms and feed processing users. The feed tank of the 20-square bulk feed truck is erected on the chassis of a second-class vehicle. The top of the tank has an inlet opening, and a screw conveying unloading pipe (commonly known as: unloading cage) on the top can rotate and lift freely, and the elevation angle is up to At 60 degrees, the screw is driven by the power output shaft of the motor to complete unloading.

20- cbm bulk feed truck parameter configuration table and picture display

20  cbm bulk feed truck
Dongfeng Tianjin 20 cubic meters bulk feed truck , vehicle model: CLW5161ZSLD3, chassis model: DFL1160BX, adopts Dongfeng Tianjin’s original chassis, 4×2 drive, D530 flat roof, one row and a half row of luxury cab, Cummins 170 horsepower EGR6 Cylinder or 180 horsepower 4-cylinder electric fuel injection intercooled supercharged engine (this model does not have a 190 horsepower engine, all are 170 horsepower modified to 190, which can correspond to the announcement parameters), wheelbase 5000mm, electric heating (glow plug) cold start device , All-steel 160L fuel tank, Φ395mm push diaphragm spring clutch, Dongfeng 6-speed DF6S750 gearbox, 4.5-ton front axle, 9-ton rear axle, 250×80×(7+4) mm double-layer girder, 9.00-R20 steel wire Tires, semi-floating cab rear suspension, hydraulic and mechanical flip, channel type instrument panel, with air conditioning.
The effective volume of the bulk feed tank is 20 cubic meters meters (the feed density is 0.5-0.65 cubic meters meters per ton), and the material is conveyed in the form of electric auger. It can be operated by plugging in 380 volts electricity. The electric motor drives the mechanical screw way to unload. The material speed is fast and can be operated continuously, which greatly improves the production efficiency. The tank body has a three-silo structure, which can load three different feeds at the same time; each part has a simple structure, and the integrated electronic control operation box is located at the end of the tank body. The operation mode is clear at a glance, convenient and flexible, and easy to maintain.

The 20-cbm bulk feed truck is modified with Dongfeng Tianjin DFL1160BX chassis. The 20-cbm bulk feed truck is mainly used to transport finished bulk feed products or raw feed production from feed plants to livestock farms and poultry farms and feed processing users. At the same time, it can also be used to transport Certain non-corrosive powdery and granular raw materials, such as pharmaceutical factory powder and grain storage turnover.
The tank body of the 20 cubic meters bulk feed transporter can be divided into 2-3 bins, which can be divided into different types of feed. Each bin can load and unload independently, which has the advantages of reducing packaging costs, saving feed, and avoiding feed pollution during loading and unloading and transportation. The operation is simple, and it can be divided into hydraulic and electric power.

The top of the 20-cbm bulk feed truck has an inlet, and a screw conveying and unloading pipe (commonly known as: unloading cage) on the top can rotate and lift freely. The elevation angle can reach 60 degrees. The screw is driven by the power output shaft of the motor. To finish unloading.

The following are the main technical parameters of the 20 cubic meters bulk feed truck :

Vehicle name: Bulk feed truck 20  cbm bulk feed truck
Vehicle category: Feed truck
Vehicle model: CLW5161ZSLD3
Chinese Brand: Cheng Liwei
Exemption: no
Fuel: no
Exemption : no
Environmental protection: no
Manufacturer: Chengli Special Automobile Co., Ltd
company address: Hubei Suizhou southern suburbs Cheng Li Automobile Industry Park
Announcement batch: 2001o0 240 Catalog number: (Seventeen) 74
Dimensions (length/width/height): 9000×2450×3600 Cargo compartment (length/width/height):
Total mass (Kg): 16000 Load quality utilization factor:
Curb weight (kg): 8305 Rated load (kg): 7500
Rated passengers (person): Front passenger (person): 3
Approach / departure angle: 20/12 Front suspension/rear suspension: 1430/2570
Wheelbase (mm): 5000,4700 Axle load: 6000/10000
Number of axes: 2 Number of springs: 7/9+6,8/10+8
Number of tires: 6 Tire specifications: 9.00-20,9.00R20,10.00-20,10.00R20,275/80R22.5
Front track: 1880 Rear track: 1800, 1860
Steering Type: steering wheel Starting method:
Product ID: ZKAMZ3XN013 Release date: 20120919
Identification code: LGAX2A13×LGAX2B13× According to the standard: GB3847-2005, GB17691-2005 Euro III GB3847-2005, GB17691-2005 Euro III
Chassis model: DFL1160BX
other: 1. The name of the conveying medium: extruded and pelleted feed, powder; density of the medium: 800 kg/m3
2. Effective tank volume: 15-22 cubic meters meters, tank body dimensions (mm): 6010×2300×1900, protective material: Q235A truck bon steel, connection method: welding connection on the left and right sides and rear bottom protection, rear Protection section size (mm): 100×50×5, rear protection ground clearance (mm): 490
3. The truck uses (mm): 5000 wheelbase, only ISDe180 30, ISDe185 30, ISDe210 30, B190 33 engines.

Special performance parameters of 20 cubic meters bulk feed transporter:

Total tank volume (m3) 15-22 parties are selected by the customer
Number of tanks 3 (with sub-storage mechanism, can transport 3 different feeds at the same time)
Unloading speed (kg/min) 400-550
Swivel angle of movable unloading system ±180o
Maximum elevation angle of movable unloading system 60o
Maximum horizontal distance (m) 6.1
Maximum vertical distance (m) 7.6


Welcome to Chengli Special Automobile Co.,Ltd, pls contact us via: sales@chenglico.com


Anonymous Write